The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old December 9, 2010, 11:31 AM   #1
Fiv3
Senior Member
 
Join Date: May 18, 2010
Posts: 273
Help IDing an old Italian Colt Clone

Howdy fellas

My dad informed me the other day that he had found an old revolver in his father in law's filing cabinet. He said that my stepbrother didn't want it, and figured his jackass brother-in-law would probably just sell it. So, he asked my step mom if I could have it, and she said yes.

My dad doesn't know much about guns short of the .22 revolver and .25 saturday night special that he owns. I had no idea what I was getting. I opened the case to find what I believe is an Italian made Baby Dragoon. I'm not sure if it's .31 or .36 cal, but it has a brass frame, is five shots, and has what looks to be a stagecoach hold up scene etched on the cylinder.

I don't know much about Italian import marks but it is makes on the butt of the grip "DART ITALY".

It looks to be in pretty good shape. Just a little wear around the hammer and nipples (certainly wouldn't trust the "pins" to keep this one safe). The steel shows some mild pitting and a little bit of surface rust. The brass is obviously tarnished. Who knows how long this gun had been sitting in its case in that filing cabinet.

Here's a pic off my phone with a swiss army knife for scale.



Would any of you gurus be kind enough to give me a little info on this lil' bugger? Any idea what it's worth. I dunno if I should shoot it, sell it, or use it as a paper weight. If it's worth much, I'm giving it back to my dad. A dead man's gun whom I didn't know doesn't seem right for me to keep if it is indeed some sort of heirloom.

...or is it just the typical Italian replica made during the spaghetti western craze?

Thanks in advance, guys.
Fiv3 is offline  
Old December 9, 2010, 12:01 PM   #2
robhof
Senior Member
 
Join Date: September 16, 2007
Posts: 706
robhof

It's a replica of the 1849 Colt pocket or Baby Dragoon, should be 31cal. For the maker; look for "MARCO" on the frame, that would be Armi San Marco, maybe Pieta, I don't know their logo. If it cocks and the cylinders line up with the barrel and it's clean in the bore; I'd fire it, 10 to 12gr 3f b/p or equal in b/p sub and 32 ball. I've got a steel frame one that's very accurate and fun to shoot.
robhof is offline  
Old December 9, 2010, 12:14 PM   #3
Fiv3
Senior Member
 
Join Date: May 18, 2010
Posts: 273
thanks for the info

The only marking short of DART I can find are AC and PN I'm guessing PN might be Pietta?

Also, would a .357 cleaning brush fit into a .31 cal barrel? Just to see what it was, I fished my nylon .357 brush down the barrel without much issue. Are we still thinking it's .31?
Fiv3 is offline  
Old December 9, 2010, 12:26 PM   #4
Bootsie
Member
 
Join Date: April 30, 2007
Location: Hofheim/Germany
Posts: 89
AC is the code of the italian proof houses for 1977, i. e. the little shooter was made 1977.
PN is the black powder proof stamp of Gardone.
Bootsie
Bootsie is offline  
Old December 9, 2010, 12:32 PM   #5
Fiv3
Senior Member
 
Join Date: May 18, 2010
Posts: 273
Thanks

I am really learning a lot
Fiv3 is offline  
Old December 9, 2010, 07:15 PM   #6
robhof
Senior Member
 
Join Date: September 16, 2007
Posts: 706
robhof

I was going by the size comparison and the cylinder markings, but it could be a Pocket Police, Colt replica and then it would be a 36. Usually they are slightly larger than the 31's. Run a caliper across the cylinder opening, or if no caliper, use a tape measure and see if you can get a measure of the diameter of the cylinder bore.

Last edited by robhof; December 9, 2010 at 07:30 PM.
robhof is offline  
Old December 9, 2010, 07:50 PM   #7
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,865
[QUOTE-Fiv3]I opened the case to find what I believe is an Italian made Baby Dragoon. I'm not sure if it's .31 or .36 cal, but it has a brass frame, is five shots, and has what looks to be a stagecoach hold up scene etched on the cylinder. [/QUOTE]

.31 cal, 5 shot, stagecoach scene on cylinder, 4 inch barrel, square back triggerguard. Definitely a Baby Dragoon. As to maker. Probably one of the many small replica makers (COM, DOM, PR, MOFRA, GB) that churned out pistols for US importers during the 60s and 70s.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old December 9, 2010, 09:48 PM   #8
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,605
Hey folks

Does the roll engraving tell you anything?

You see this on pistols but not everyone did it and not every used the same pattern.

Where is bprevolver when you need him?
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old December 9, 2010, 11:08 PM   #9
pohill
Senior Member
 
Join Date: December 27, 2005
Location: northeast
Posts: 521
This was on another post a year or so ago:

"Dart is the trademark of the Italian company named "River Estrina" of Brescia, Italy. The company was a registered Italian gunmaker in 1971."
pohill is offline  
Old December 10, 2010, 12:06 AM   #10
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,865
Thanks for the DART reminder Pohill. I knew I had read about it somewhere; but couldnt find a reference.

Colt did five different roll engravings on revolvers. The Paterson had a band depicting either a Centaur with two pistols killing two horsemen, or a stagecoach holdup scene. Baby Dragoons had an Indian fight scene, and '49 Pocket models had the stagecoach holduop scene. Walkers and Dragoons had a scene of Mounted Dragoons fighting Indians on horseback, and the '51 Navies, '61 Navies, and '60 Armies had the Ormsby Naval Battlee Scene.

Technically, with the Stagecoach holdup scene on this revolver, it makes it a brass framed repro of the '49 Pocket model with square back trigger guard instead of the Baby Dragoon; but to most people, the names are interchangeable, and the replica makers mixed and matched distinguishing parts so the proper names don't apply anyhow.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old December 10, 2010, 06:26 AM   #11
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,605
Fingers....

....I was talking about the engraving that was applied to the frames and in some cases other parts of replicas. I saw a photo of an ASM with a roll engraved frame the other day. At a gun show I handled a roll engraved example that came from another manufacturer (can't remember which)

I am not a fan of this feature. I think it is an attempt to pretty up a revolver that falls flat on it's face. I don't mean to offend "Fiv3"s revolver. The value in this particular specimen emerges from its history not from its features.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old December 10, 2010, 07:45 AM   #12
junkman_01
Junior member
 
Join Date: November 9, 2010
Location: Florida
Posts: 260
Doc,

I don't think any frames were ever roll engraved on repro revolvers. I do believe that they were etched by acid or laser to simulate real engraving.
junkman_01 is offline  
Old December 10, 2010, 07:53 AM   #13
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,605
Junkman

Yes...Possible. Laser etching became commercially viable in about 1960 and of course acid etching goes back further than that. But the effect is the same.

I want to emphasize, this is my opinion only. Others may profoundly disagree and some who own pistols with engraving applied with such techniques and of such quality as I am speaking may be offended. I am a pretty easy going guy....But I find this faux engraving to have the effect of cheapening the appearance of the revolver accept in cases in which it is a determined attempt to faithfully reproduce what was on the original version of the revolver such as the cylinder scenes.

I want to also add that I would in no way cast aspersions on Fiv3's revolver. The value of that revolver has little to do with its features or condition. That revolver is a very important part of Fiv3's family history and as such it is all but priceless.

I guess I am going to have to shift over to decaf.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson

Last edited by Doc Hoy; December 10, 2010 at 08:20 AM.
Doc Hoy is offline  
Old December 10, 2010, 11:49 AM   #14
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,865
Doc...........

Understand. IMNSHO, some of the current non-hand cut engraving looks good and enhances the appearance of the gun; while some of it - and even some of the hand cut variety, doesn't. It's all a matter of taste.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old December 10, 2010, 12:19 PM   #15
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,605
Fingers....

I'll buy that.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old December 10, 2010, 02:02 PM   #16
Fiv3
Senior Member
 
Join Date: May 18, 2010
Posts: 273
Thanks again guys

I'm THINKING it might be a .31. I had some .32 S&W long ammo laying around that matches up better to the bore than something in the .35+ range. It certainly doesn't look like a .357 bullet would fit in there, so I'm guessing it's .31.

Doc, no worries about not liking the engraving. Honestly, i think they are hokey as well. While I much prefer the look of unfluted cylinders, I really dislike all the "decoration" on these models. I will say the little scroll work and hashes on the brass from and barrel do add a little something to the gun, but a bunch of pioneers being gunned down?

...or was this marketing on the gun. "If only these poor souls would have been at least armed with a pocket Colt!"

I do want to thank you all again. It looks like I'll be shooting this one once I get some ammo in. While I would have never bought one this small, I have to say that I haven't put this thing down since I unzipped the case yesterday. It walks and talks like a champ even with all the wear on it. The frame and steel cleaned up pretty nice, too. The nipples appear to be flattened. This could be from a lot of use, or too much full on dry firing. At any rate, my #11s fit just fine, but I do get a bit of typical "colt binding" unless i give the gun a good robust shake vertically between shots.

I might have to get an 1860 next to compliment this lil bugger. Heck, my birthday is coming up in a couple months. Maybe I can sweet talk the wife into letting me plunk down the scratch for a Walker
Fiv3 is offline  
Old December 10, 2010, 02:11 PM   #17
junkman_01
Junior member
 
Join Date: November 9, 2010
Location: Florida
Posts: 260
No thinking about it. It IS a .31 cal. A pocket model in .36 cal. has a rebated cylinder (larger in the front than the rear) like a 1860 Army model.

I don't know if it is the lighting or something, but in the picture of this gun, it looks like the barrel is pointed upward. This could be caused by a too short arbor and a wedge inserted too far. What is the barrel to cylinder gap?
junkman_01 is offline  
Old December 10, 2010, 03:05 PM   #18
pohill
Senior Member
 
Join Date: December 27, 2005
Location: northeast
Posts: 521
They are fun guns to shoot. I use O buckshot - it fits perfectly and it's relatively cheap.
pohill is offline  
Old December 10, 2010, 03:08 PM   #19
Fiv3
Senior Member
 
Join Date: May 18, 2010
Posts: 273
I think its an optical illusion. I was standing over the gun and taking the pic on my counter. It looks pretty straight to me. The barrel mates perfectly into the frame, no wallowing of the brass and the pin and wedge seems to line up just fine.

I'm really curious to see how this thing shoots
Fiv3 is offline  
Old December 10, 2010, 08:30 PM   #20
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,808
The wedge is in way too far.
Hawg is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10787 seconds with 7 queries