The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old October 10, 2010, 06:58 PM   #1
Senior Member
Join Date: January 9, 2007
Posts: 1,007
Cutting a Rifle Barrel

How hard is it to make a 26 inch Rem 700 into a 20 inch? What would one expect to pay a gunsmith for a job like this? Any input appreciated.
shepherddogs is offline  
Old October 10, 2010, 07:07 PM   #2
Mr Dish
Senior Member
Join Date: December 25, 2009
Location: Shepherd, MI
Posts: 128
I would probably pay whatever he asked me to pay.....since he is the one doing the work.

Sorry if this seems like a silly reply but I am in a slightly silly mood tonight.
Vote Libertarian or QUIT COMPLAINING!
Mr Dish is offline  
Old October 10, 2010, 09:20 PM   #3
Senior Member
Join Date: October 18, 2009
Location: Lampasas, TX
Posts: 326
Go to Brownells website and purchase a recrowning tool and do it yourself. A hacksaw, some cold blue, and a recrown tool are going to be the cheapest way to go. Just be sure to leave it legal length and cut it as close to square as possible, and it is a pretty easy job. You can always have a gunsmith fix it if you mess it up, but this is a very simple job really.
dawico is offline  
Old October 12, 2010, 02:13 AM   #4
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 11,868
Typically, a good gunsmith will charge about $50-$75 for shortening a barrel. That would involve removing the barrel from the action, cutting to the desired length, recrowning (in a lathe), and reinstallation.
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old October 12, 2010, 03:10 AM   #5
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,436
Something not to be overlooked is the labor intensive (if applicable) removal and re-installation of the front sight assembly.
zippy13 is offline  
Old October 21, 2010, 08:04 PM   #6
Junior Member
Join Date: October 21, 2010
Posts: 12
in my area

I'd expect to pay $300 to $350

the only reasonable 'smith has retired.
nanuk-O-dah-Nort is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07983 seconds with 9 queries