The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 8, 2010, 12:15 AM   #26
BillBailey
Junior Member
 
Join Date: October 7, 2010
Posts: 14
New to the forum and so while I'm waiting for replies to my first post I came across this thread. Was in a gun shop yesterday and the owner had 2 working scale model cannons that had only a 1" bore with 18" spoke wheels and it was very very heavy, but cool! Anyway, point being that I've been building 50 caliber, civil war type, breach loading, cannons out of water pipe and scraps the past couple of weeks and that's enough fun for me and the grandkids. We use 1.5 grain firecrackers and that will shoot a 1" wooden "shell" about 30 yards. We've got 6 working models so far and counting. Fun fun!
BTW, any ideas on making a scale exploding "shell"? Which is why I was in the gun shop in the first place.
BillBailey is offline  
Old October 8, 2010, 07:16 AM   #27
jmorris
Senior Member
 
Join Date: November 22, 2006
Posts: 1,672
There is lots of info out there, they have their own forums. I am putting together a bowling ball mortar but I am leaning towards pneumatic instead of powder. With powder you only get 4 shots per pound but it’s easier to build. With pneumatic I can shoot all I want for the cost of gas for my air compressor, can use the rig as a sawdust cannon and a bead seater too.

For a bowling ball most people use a high pressure Oxygen or various inert gas tanks. The tank you are looking for is (approximately) 9.28” in diameter with a circumference of 29 3/16” , .350” wall thickness and a bowling ball slides in will a little room to spare.

jmorris is offline  
Old October 8, 2010, 10:37 AM   #28
hickstick_10
Senior Member
 
Join Date: August 8, 2009
Posts: 477
One like this?

Pipe or old oxy tanks ect will work.

Or you can put some real effort into it so your cannon so it doesn't look like a crude and childish farmers contraption.

http://www.practicalmachinist.com/vb...cannon-211776/
hickstick_10 is offline  
Old October 8, 2010, 11:42 AM   #29
brickeyee
Senior Member
 
Join Date: December 29, 2004
Posts: 3,342
Quote:
I personally cant wait to see the AOW charges this guy will rack up.
Better not tell all the civil war reenactors.

Muzzle loading cannons and mortars are not 'weapons.'
brickeyee is offline  
Old October 8, 2010, 12:46 PM   #30
BillBailey
Junior Member
 
Join Date: October 7, 2010
Posts: 14
Mine are primarily "rainy day cannons" as you can fire them in your living room and even hit pictures of the inlaws. Most times the "wad" stays in the barrel so there is no cleanup. 50 caliber Whitewood doweling is the projectile of choice . . . results may vary.

Attached Images
File Type: jpg V3 002.jpg (46.9 KB, 53 views)

Last edited by BillBailey; October 8, 2010 at 11:38 PM.
BillBailey is offline  
Old October 11, 2010, 05:06 PM   #31
jmorris
Senior Member
 
Join Date: November 22, 2006
Posts: 1,672
Quote:
Or you can put some real effort into it so your cannon so it doesn't look like a crude and childish farmers contraption.

http://www.practicalmachinist.com/vb...cannon-211776/

Don't bash on farmers.

from your link...

Quote:
then a tool and die assembly for punching holes in cattle watering electrical plates.
buckstix.com has a real good one.
jmorris is offline  
Old October 13, 2010, 05:51 PM   #32
Giovanni
Member
 
Join Date: October 4, 2010
Location: Cary, NC
Posts: 25
A number of years ago I was in the NSSA while living in Virginia. During the "Nationals" Winchester, Virginia there would be cannon competitions in two catagories. One was smooth boore and the other rifled cannon. They would shoot some plaster paris can projectile in the rifled cannons and quite frankly I don't what in the smooth bore. I tell you what those suckers were accurate hitting flower pots, bull eye targets at over 100 yards +.

John

Here's a link that i found:
http://www.nwtskirmisher.com/about.shtml

Last edited by Giovanni; October 13, 2010 at 06:27 PM. Reason: Additional Information
Giovanni is offline  
Old October 13, 2010, 07:22 PM   #33
abelacres
Senior Member
 
Join Date: August 5, 2010
Location: Jackson County Florida
Posts: 207
Don't know if this is true but it's a good story...

I talked to some Civil War reenactors one day at my old job
I forget what size cannon they had but it was on a goose neck trailer. (it was very big)
They told me that one time they loaded it with a 25ft piece of 3/8 logging chain and fired it parallel with the ground.
Cleared out a lot of brush before it finally embeded itself in a oak tree.

They called it The Weedeater From Hell

They said they never did get the chain out of the tree.
__________________
If something seems too good to be true it's best to shoot at it just to be sure
abelacres is offline  
Old October 17, 2010, 01:08 AM   #34
prob
Member
 
Join Date: August 2, 2009
Posts: 34
Cannons are great fun. The internet is full of information on barrels, carriages, loads, etc. Use common sense and you'll be fine.
prob is offline  
Old October 17, 2010, 11:10 AM   #35
TXGunNut
Senior Member
 
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,854
Been thinking about one for years, will likely start out with a store-bought .50 cal that will mostly hang out on the coffee table (no inlaw pics for targets!) and will someday maybe move up to 1". I doubt I'll be able to feed anything bigger but every time I see video of the bronze mortars I want one of those, too.
__________________
Life Member NRA, TSRA
Smokeless powder is a passing fad! -Steve Garbe
I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove
My favorite recipes start out with a handful of used wheelweights.
TXGunNut is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08777 seconds with 8 queries