The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 14, 2010, 05:54 PM   #1
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,170
Douglas Rifle Barrels

Is the opinion of Douglas rifle barrels still as favorable today as they were in the past? I don't hear/read anything about them anymore. Any of you still use them?
TheNatureBoy is offline  
Old August 14, 2010, 06:03 PM   #2
Bud Helms
Staff
 
Join Date: December 31, 1999
Location: Middle Georgia
Posts: 12,978
Let's take this to the Smithy ...

It's been a few years since I was barrel shopping, but when I was building my own, Douglas air-gauged were always at or near the top of my list.

Brownell's still stocks them: http://www.brownells.com/.aspx/pid=5...PREMIUM_BARREL :
Quote:
* XX Grade; Hand-Selected For Uniformity To Within .0001"

Every barrel is precision, instrument-inspected for absolute straightness and, air gauged for maximum uniformity to yield the greatest accuracy possible. Land and groove tolerance from breech to muzzle can vary only .0001". Only a barrel that meets these demanding criteria wears the XX Premium stamp.
__________________
"The irony of the Information Age is that it has given new respectability to uninformed opinion." - John Lawton, speaking to the American Association of Broadcast Journalists in 1995
Bud Helms is offline  
Old August 15, 2010, 03:24 AM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,340
Douglas makes a good barrel. It's just that they make about the same quality of barrel they made 40 years ago, and everyone else has gotten so much better.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old August 15, 2010, 07:55 AM   #4
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,336
It's a question of price, at $325 a barrel they are competing against the best of Shilen, Lilja and Walter. And, as you said, it's been quiet around them lately, so it's hard to justify the expense without proof they're still among the best in the business.
Barrels in this class are so hard to compare because you can't just go and pop 4 different barrels in a gun to test, you need to do load development for each, and the one that shoots 10 mm groups wins over the one that only does 12 mm at it's best.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old August 15, 2010, 08:42 AM   #5
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,211
I've built a few target rifles in the past. I use Douglas Prem. barrels. I've found them to be accurate. I've tried a few others but don't see an advantage that would warrant the extra cost.

If you do any shooting at all, you are gonna shoot out barrels which need to be replaced. It's cheaper to keep a gun w/Douglas barrels going.

Gene Barnett used Douglas barrels for his M14/M1A barrels, I talked with him quite a bit when he was running the Pistol Armor's van at the Wilson matches. He thought their quality was a good if not better then others.

Of course a lot of it has to do with the shooter, since shooting is 90% mental, so if you think your barrel is a shooter, it will be, if you think it's a dud, it will be.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old August 15, 2010, 07:50 PM   #6
geetarman
Senior Member
 
Join Date: November 18, 2009
Location: Arizona
Posts: 2,683
My Remington 700 was retubed with a Douglas stainless steel tube and it has turned into a real shooter. My best to date has been a .43 for 5 shots at 100 yards using 52 gr. Sierra Match Kings and 38 gr. H380.

I am more than just a little happy with it.

Geetarman
geetarman is offline  
Old August 16, 2010, 01:55 AM   #7
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,404
There may be some Douglas barrels that cost $320 but I was just on their website a few days ago and I think if you will go there you will find their standard XX bbl in hunting contours for substantially less.
I will say if you get the bbl from Brownells and such,you will likely get a bbl that is of the chosen contour,but it will be rough turned.
Myself,I suggest going the finish turned and polished.
I have had very good results with them and would not hesitate to use a Douglas.They shoot better than I do.
Now,I must confess it has been at least 15 years since I have used a Douglas,but its not their fault.
HiBC is offline  
Old August 16, 2010, 07:46 AM   #8
rickdavis81
Senior Member
 
Join Date: April 3, 2006
Location: Missouri
Posts: 398
I have a douglas on a savage I built. It shoots great(for my abilities) and I would not hesitate to use another one. I looked over them all when choosing and it is hard to pick, so many choices, they can all turn out hummers or lemons.
rickdavis81 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08348 seconds with 9 queries