The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 12, 2010, 09:11 PM   #1
coachseeley
Member
 
Join Date: August 11, 2010
Posts: 19
S&W 45LC trigger job

I have a S&W 5" 45LC, and the double action pull is pretty stout. Has anyone had success with a trigger job on your Smith N Frame (I'm guessing 44 or 45 caliber input will work). I hear that if the pull is too light, the hammer won't kick start the primer... any thoughts?
Thanks,
Steven
coachseeley is offline  
Old August 12, 2010, 09:56 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,450
There is no reason the trigger pull of an N frame S&W in .45 Colt would be any heavier than one in .357 or .44. Unless something is wrong with that gun, the trigger pull can be smoothed and lightened the same as any other S&W.

Since the hammer on an N frame is large and heavy, the spring weight can be reduced some without danger of misfires but, as with any such work, the revolver should be fired at least a couple of hundred rounds to make sure there is no problem.

May I suggest, though, that you might not have the experience to do the work yourself and might want to consult a gunsmith.

Jim
__________________
Jim K
James K is offline  
Old August 13, 2010, 08:42 AM   #3
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,505
There are two ways of doing it correctly. 1) Take it to a competent smith. 2) If you are very good with tools and have good mechanical ability, buy the appropriate Kuhnhausen shop manual, and get Micklic's video showing how it is done.
dahermit is offline  
Old August 13, 2010, 09:55 AM   #4
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 5,354
Properly done as on my old M29 you can get a very smooth 9 lbs DA and 2.5 lbs SA .It is fully reliable and has seen a great many rounds . BTW it has a 3/8" smooth trigger.
__________________
And Watson , bring your revolver !
mete is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08135 seconds with 7 queries