The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 5, 2010, 06:04 PM   #1
Ervin
Junior member
 
Join Date: October 9, 2009
Posts: 125
Shorter M14 mags?

Ive seen these 5rd mags, and they should be perfect for the 200yd 5rd slow fire from the standing.



my question is, has anything been invented, like a floor plate with a spring+follower (like on bolt action rifles) for the M14 to make it look more like an M1 Garand..with nothing sticking out of the mag well?


and, are there any tactical synthetic stock M14s under $1K?


thanks in advance
Ervin is offline  
Old August 5, 2010, 08:09 PM   #2
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,553
If I am not mistaken (I shot mostly M1 Garand in competition), for the standing position using an M1A (or M14) the left arm is tucked against the left side and the bottom of the magazine is used to hold the gun. With a short magazine that would not be possible. Can some M1A competition shooters help here?
dahermit is offline  
Old August 5, 2010, 09:02 PM   #3
Jo6pak
Senior Member
 
Join Date: August 5, 2010
Location: West Coast...of WI
Posts: 1,530
I have several 5 round mags for my M1-A. One of them fits flush with the stock, but I has no markings on it. Think I traded a 5 round AR mag for it.

I have a Vltor Modstock which I love. Ordered it from SKD Tactical. Great customer service
http://www.skdtac.com/Vltor_M14_M1A_..._p/vlt.204.htm

__________________
NRA Life Member, SAF contributor.

Last edited by Jo6pak; August 7, 2010 at 08:20 PM.
Jo6pak is offline  
Old August 7, 2010, 12:55 AM   #4
Ervin
Junior member
 
Join Date: October 9, 2009
Posts: 125
so are there any cheaper M14s beside the Springfield Armory ones?

Im not going for any of that chinese crap
Ervin is offline  
Old August 7, 2010, 01:21 AM   #5
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,567
"...that Chinese crap..." The early Norinco and Polytech rifles that made it into the U.S. before the Clinton ban were questionable, but current rifles are not 'crap'. Can't be imported Stateside anyway. They're not being made anymore either.
"...tactical synthetic stock..." There's no such thing as a 'tactical' anything. It's a marketing term only. If you're paying a grand for any stock, you're very new.
"...make it look more like an M1 Garand..." No. SA Inc. mags supposedly fit flush though.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old August 7, 2010, 04:57 PM   #6
Ervin
Junior member
 
Join Date: October 9, 2009
Posts: 125
tactical as in tactical colors (OD green or black =/=wood)
I need the mag to be flushed with the stock because of my standing stance (Im used to M16s)

is there anything cheaper than Springfield's M1As?
It feels uncommon that a $1K M14 is the only choice

who would pay 1K for a stock?
you read that wrong
Ervin is offline  
Old August 7, 2010, 08:19 PM   #7
Jo6pak
Senior Member
 
Join Date: August 5, 2010
Location: West Coast...of WI
Posts: 1,530
Sorry for my misunderstanding.

The Chinese made M14s seem to be hit and miss. I had a Polytech M14 before getting the Springfield, and had no issues with it. It was accurate enough, and ran fine for years.
A buddy had a Norinco that would not shoot better than about 5 MOA no matter what he fed it.
At the range once, I saw a guy have the op rod disconnect from the bolt on a Polytech. He said it happened once in a while when he was shooting quickly.

Keep an eye out at shows and shops. I got a deal on a used M1A scout for under $900. It was a retired LE gun, the stock had some "trunk wear" but the metal, bolt, and bore were in perfect condition.
__________________
NRA Life Member, SAF contributor.
Jo6pak is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07175 seconds with 9 queries