The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old July 28, 2010, 01:51 PM   #1
Richardm
Junior Member
 
Join Date: July 17, 2009
Location: Mid Michigan
Posts: 13
Short .223 cases

I have read several posts about cartridge length and have read that the SAAMI specs for a .223 is 1.740-1.760. I am trimming my cases to 1.750. When I size a short case it seems to lengthen about .004. I have lots of cases that are 1.745 or less. Does this mean these short cases (under 1.745) should not be used? If they can be used how does one automate bullet seating for that large a variatiion safely? Thanks
Richardm is offline  
Old July 28, 2010, 02:12 PM   #2
PA-Joe
Senior Member
 
Join Date: June 9, 2010
Location: NEPA
Posts: 744
It's ok to use them. Seating should not be an issue but crimping might.
PA-Joe is offline  
Old July 28, 2010, 03:01 PM   #3
IllinoisCoyoteHunter
Senior Member
 
Join Date: December 23, 2008
Location: Southern Illinois
Posts: 1,506
Use them. After some firing and full length sizing, they will "grow" and be within spec. LONGER cases is where you can run into problems. If the case neck is too long it can pinch the bullet when chambered, maybe causing excessive pressure.
__________________
~~IllinoisCoyoteHunter~~

~NRA LIFE MEMBER~
~NRA CERTIFIED INSTRUCTOR~
IllinoisCoyoteHunter is offline  
Old July 28, 2010, 04:30 PM   #4
demigod
Junior member
 
Join Date: March 13, 2008
Location: AZ
Posts: 1,129
There's factory ammo that has cases shorter than that. Shoot them into length.
demigod is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05776 seconds with 7 queries