The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 21, 2010, 03:10 PM   #1
ks_wayward_son
Senior Member
 
Join Date: July 19, 2007
Posts: 252
CZ 82 work

1.)Been have some feeding issues with my CZ 82. I know I NEED to clean it, but was thinking of some other things which could perhaps be done also. I was watching someone on youtube using a Dremel, buffing pad, and compound as a do it yourself feed ramp polishing. I was also considering maybe installing a new factory recoil spring from Wolff. Perhaps I should just give it a good cleaning and see if that does the trick first?
ks_wayward_son is offline  
Old July 21, 2010, 07:08 PM   #2
BOP222
Junior Member
 
Join Date: January 31, 2005
Posts: 8
As with any military surplus..you just don't know how many rounds have been fired (although the 82s I have, seems to have been stored more than shot) but yes, a good cleaning would be the first thing to do...

Could you explain "feeding problems"? It shoots then doesn't feed the next round? Won't strip off the top round when the slide moves forward? Feed vs ejects?

Springs are certainly cheap enough...
BOP222 is offline  
Old July 23, 2010, 12:40 AM   #3
Shadow7d
Member
 
Join Date: June 12, 2010
Location: Alaska
Posts: 42
The most common problem is that you have a .380 mag that you are trying to cram a 9mak through, they are the same mag, but have different angles for the feed lips,

Do you know that mag is the correct one (hint, it should have a Czech army acceptance mark, crossed swords stamp about an inch above the baseplate)

after that, these are used guns, but every one I've seen and fired was fine, only the mags and that damn sear spring seem to give problems.
Shadow7d is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07074 seconds with 9 queries