The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 9, 2010, 10:35 PM   #1
dewcrew8
Senior Member
 
Join Date: August 7, 2009
Posts: 164
broken screw on super blackhawk hunter

does any one know how long the screw is for the ejector rod housing . I was shooting it and the screw broke off flush as i shoot. i was going to drill and use a ezout but I dont know how long the screw is. the pistol is a 44 mag nickel
dewcrew8 is offline  
Old July 10, 2010, 08:05 AM   #2
GunCat
Member
 
Join Date: December 27, 2008
Location: Western, KY
Posts: 41
I don't have a Ruger handy to measure the screw right now, but you can do this:

Measure the outside diameter of the barrel near the broken screw. Subtract .430 (the inside bore diameter) from your measurement then divide that answer by 2. This will give you the barrel wall thickness.

(OD-ID) / 2 = Barrel wall thickness

Make sure you drill in less than the barrel wall thickness (other wise you'll have a nice hole in through the barrel)
__________________
Hardships are quickly forgotten. Intense heat, bitter cold, rain and snow, fatigue, and luckless hunting fade quickly into memories of great fellowship, thoughts of beautiful country, pleasant camps, and happy campfires.
Fred Bear 1902-1988
GunCat is offline  
Old July 10, 2010, 09:29 AM   #3
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,530
It is a dumb idea to try and fix it yourself. You may: 1. Damage the gun. 2. Make the screw even harder to extract by messing with it. If you have to ask how to remove the screw, you do not have the requisite skills to remove it without damage. And, after removing it, you will still have to contact Ruger to get another screw and they will frequently ask you to send the gun in for repair so that they can be assured that it is going to be repaired correctly.

Ruger has historically, one of the best service departments. They fix what they make. If they damage the barrel, they will replace it.

I they have fixed guns for me that I bought second hand (had no obligation to me), and "fixed" guns that I have lost parts from...without charge.

That is why it is a dumb idea to attempt to fix the broken screw yourself.
dahermit is offline  
Old July 10, 2010, 10:06 AM   #4
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
FWIW, It's entirely legal for any US citizen to ship & receive their own handgun to/from any gun factory/customizer/repaier facility (they are all FFL's) without going through an FFL on their end.

If you call Ruger's Customer Service, they may even send you a prepaid shipping carton...........................

You have zero to lose by asking them.

.
PetahW is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06938 seconds with 9 queries