Savage 24 Barrel

former 173rd · June 23, 2010, 12:58 AM

Greetings fm Washington!

Looking desperately for a Mdl 24 barrel. .22/anything will do. Seems someone has took a file to the breech end of the .22 barrel and the firing pin won't reach!

thanks,
John

PetahW · June 23, 2010, 10:14 AM

FWIW, a simple filing of the barrel face will not be related to the FP sriking/igniting the cartridge, since the rim is supported by the rim recess and not the bbl face.

Your M24 might have it's .22 FP tip broken off.

.

kraigwy · June 23, 2010, 10:46 AM

Assuming it is the barrel and not the firing pin, a cheap, effective and if done right accurate fix it put a barrel insert in the barrel and re-chamber it.

Basically amounts to drilling out the barrel with a special drill (sold by brownells), and gluing (I use Brownell's Accra Gel) or silver soldering in the barrel blank (after you cut it to length), Use a 22 LR Chamber reamer and crown the barrel (blank).

I've done several and they turned out to be great shooters. Brownell's instructions say it can be done with a slow electric hand drill, but I like doing it on a lathe.

GO SLOW AND USE LOTS OF CUTTING FLUID

Scorch · June 24, 2010, 03:02 PM

Call John Taylor at Taylor machine.
(253) 445-4073

June 23, 2010, 12:58 AM	#1
former 173rd Junior Member Join Date: October 16, 2008 Location: Northwest WA Posts: 10	Savage 24 Barrel Greetings fm Washington! Looking desperately for a Mdl 24 barrel. .22/anything will do. Seems someone has took a file to the breech end of the .22 barrel and the firing pin won't reach! thanks, John

June 23, 2010, 10:46 AM	#3
kraigwy Senior Member Join Date: June 16, 2008 Location: Wyoming Posts: 8,618	Assuming it is the barrel and not the firing pin, a cheap, effective and if done right accurate fix it put a barrel insert in the barrel and re-chamber it. Basically amounts to drilling out the barrel with a special drill (sold by brownells), and gluing (I use Brownell's Accra Gel) or silver soldering in the barrel blank (after you cut it to length), Use a 22 LR Chamber reamer and crown the barrel (blank). I've done several and they turned out to be great shooters. Brownell's instructions say it can be done with a slow electric hand drill, but I like doing it on a lathe. GO SLOW AND USE LOTS OF CUTTING FLUID __________________ Kraig Stuart CPT USAR Ret USAMU Sniper School Oct '78 Distinguished Rifle Badge 1071

June 24, 2010, 03:02 PM	#4
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 11,044	Call John Taylor at Taylor machine. (253) 445-4073 __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Taylor Machine

June 23, 2010, 10:14 AM	#2
PetahW Senior Member Join Date: September 19, 2008 Posts: 3,295	FWIW, a simple filing of the barrel face will not be related to the FP sriking/igniting the cartridge, since the rim is supported by the rim recess and not the bbl face. Your M24 might have it's .22 FP tip broken off. .