The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old June 5, 2010, 01:07 PM   #1
Corn dodger
Senior Member
 
Join Date: May 24, 2007
Location: Arizona
Posts: 108
High Standard Citation weak ejection

I have a 48 year old High Standard 103 Citation. From time to time (much to often) it will stove pipe. It will eject the brass only 2 or 3 inches high. I am thinking it is a weak or worn ejector spring, rather than a bad extractor. Maybe even a bad ejector. Any thoughts on this issue?
Corn dodger is offline  
Old June 5, 2010, 01:41 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,385
Strange, MY High Standard does not have a spring loaded ejector.
It would also eject with the extractor so worn that it would not pull an unfired round.

What ammunition? Some of the bulk stuff is very inconsistent.
Jim Watson is offline  
Old June 5, 2010, 02:15 PM   #3
Corn dodger
Senior Member
 
Join Date: May 24, 2007
Location: Arizona
Posts: 108
The ammo I use is CCI Standard Velocity. I also have already replaced the recoil spring with a conventional Wolff 5 1/5 lb. Bringing it up to factory specs.
Corn dodger is offline  
Old June 5, 2010, 06:40 PM   #4
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,843
I'd be looking at the extractor and it's spring.

Check for impacted fouling in the extractor and spring assembly and the hole in the slide.

Check/replace the extractor and spring.

Check the ejector for excess wear, breaks, or chipping.

Try different ammo.

Check/clean the chamber.

Most likely problem: The extractor assembly.
Dfariswheel is offline  
Old June 6, 2010, 02:38 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,967
I bet on number two, dirt in the extractor area. A blowback pistol doesn't need an extractor to extract (the case blows itself out of the chamber), but the extractor holds and positions the fired case for the ejector. If it doesn't do that, you get stovepipe jams.

Jim
__________________
Jim K
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07221 seconds with 7 queries