The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old May 24, 2010, 03:43 PM   #1
mtnsmith
Member
 
Join Date: November 17, 2009
Location: idaho
Posts: 29
bolt stuck on MArlin mod. 60

Hi Ya'll I haven't posted much here but I love this forum... I am having a problem with my model 60 Marlin .22 semi auto rifle.. The bolt is stuck to the rear.. I have never had this problem and I haven't taken the gun apart before either.. Has anyone experienced this problem before? Where can I get detailed take down instructions, and reassembly? Any help would be appreciated..

mtnsmith............
mtnsmith is offline  
Old May 24, 2010, 05:11 PM   #2
Clark500
Senior Member
 
Join Date: February 12, 2010
Posts: 168
I don't have any ideas on how to fix your problem, but you can find takedown instructions here:

http://www.marlinfirearms.com/pdfs/m...ad_RF_Tube.pdf
Clark500 is offline  
Old May 24, 2010, 05:27 PM   #3
ForneyRider
Senior Member
 
Join Date: December 4, 2007
Location: Forney, TX
Posts: 725
Probably just needs a thorough cleaning. We had one jam up this summer that has never been cleaned.
__________________
When all is said and done, there is a lot more said than done.
ForneyRider is offline  
Old May 24, 2010, 05:27 PM   #4
john323
Member
 
Join Date: June 16, 2009
Location: MONTEREY PARK , CA
Posts: 74
Try moving the bolt handle.
__________________
johnsgunsmithing@live.com

Southern California
Anything legal, Rifles, Handguns, Shotguns, Black powder
john323 is offline  
Old May 25, 2010, 07:06 AM   #5
oneoldsap
Senior Member
 
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,588
I bet you have either a broken recoil buffer ( $8.55 + shipping from Brownells or GunParts Corp. ), or a really cruddy gun , or both . You can go to either of those sights and download a schematic for your gun . The Marlin Model 60 is about as simple as a semi auto gets , just knock out a couple pins and everything falls out the bottom. Marlins sight has instructions for you !
oneoldsap is online now  
Old May 25, 2010, 10:09 AM   #6
RimfireChris
Senior Member
 
Join Date: April 27, 2010
Location: Pacific Northwest
Posts: 421
+ 1 on the broken recoil buffer, that's what my buddies did. in addition to the two above you can also try MidwayUSA's site, they might be a bit cheaper. Either way, download the schematic and once you get the part it's pretty clear where it goes, think it took us all of about 5 min. to get his runnin again.
RimfireChris is offline  
Old May 25, 2010, 10:39 AM   #7
mtnsmith
Member
 
Join Date: November 17, 2009
Location: idaho
Posts: 29
Thanks for the info ya'll I will get on it..

mtnsmith...
mtnsmith is offline  
Old May 26, 2010, 11:45 AM   #8
gunuserfixer
Junior Member
 
Join Date: May 16, 2010
Location: minnesota
Posts: 10
stuck bolt-marlin mod. 60

mtnsmith: Does the charging hndl. also lock the bolt back? Try pulling out on the hndl. while applying some back pressure.
gunuserfixer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07319 seconds with 7 queries