The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 1, 2007, 09:37 PM   #1
Full-choke
Senior Member
 
Join Date: May 10, 2007
Location: Ohio
Posts: 617
Building a 45-70 Double Rifle off of a Shotgun?

Okay, so I have a good buddy that is going to be leaving within a year or so to go to gunsmithing school. I told him that if he ever had to come up with a project that he could build me a double rifle in 45-70 Gov't off of a shotgun frame. I would buy the shotgun, send it out to him and he could do the work while he was learning, and I got a sweet gun.

The question of this whole thing is how big of a shotgun would I need to buy? I'm thinking a nicer grade 20 gauge SxS would work nice. Or, would I have to beef up to the 16 or twelve to get something to withstand the pressures?

Any good suggestions for a nice shotgun to start out on or to save up to would be nice too. I'd just like something that looks good and that would function more then anything.

F-C
__________________
TC Encore -6mm Rem Rifle; Ruger 10/22; Ruger 10/22 Ultimate; Stoeger Condor 20; ; Remington 1100 12; Stoeger 22 Luger; Taurus PT1911; Ruger SR40c
God gave us the gift of life. It is the most precious gift ever. To be unarmed is to be helpless to protect that gift; that is outright irresponsible. - Ted Nugent
Full-choke is offline  
Old October 1, 2007, 10:44 PM   #2
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,026
I don't know, but Ellis Brown does.

http://www.rayrilingarmsbooks.com/cg...b455.cgi/10382

BUILDING DOUBLE RIFLES ON SHOTGUN ACTIONS.
by Brown, W. Ellis.
Publisher Information:
Bunduki Publishing Ft. Collins, CO 2001

This book is written to take the gunsmith or advanced hobbyist step by step through the process of building a double rifle, using the action of a side-by-side shotgun. Chapters include evaluating actions and cartridges; building monoblocks; ribs; bushing firing pins; and proof testing. The author explains what regulation is and isn't, and offers his proven method of regulating double rifles so that both barrels shoot to the same point of impact. Brown details each step of the entire process, to end with a functional, well regulated double rifle. 187 pages, including index and black & white photographs.


You and your guy might look around on Nitroexpress.com in the gunbuilding forum.
http://forums.nitroexpress.com/postl...Board=dblbuild
Jim Watson is offline  
Old October 23, 2008, 05:47 AM   #3
ajridg@aapt.net.au
Junior Member
 
Join Date: October 23, 2008
Location: Brisbane Queensland Australia
Posts: 1
I have just registerd and your post prompted me to do so. I have done this with great results and have started on my second. The first double was regulated to 65 meters for same point of impact. It was a great deal of fun.
__________________
Spanner
ajridg@aapt.net.au is offline  
Old October 23, 2008, 04:46 PM   #4
bswiv
Senior Member
 
Join Date: June 4, 2006
Location: NE FL.......
Posts: 1,081
If my effort a picture posting worked what you are seeing is a Ruger Red Label, a old model 20 ga, that has been converted to 45-70.

Had it done last year by a smith in Iowa. He's working on a conversion of a FN 16 ga to a RIFLED 20 ga for me right now.

The Red Label is PLENTY strong as are most shotguns of relatively modern manufacture. I'm no expert but it's safe so long as you don't go using loads that are rated for the Ruger #1 in the conversion.

And do be sure he proofs it properly! Better to blow it up while in the process than in the field.





bswiv is offline  
Old October 24, 2008, 09:17 AM   #5
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
double

Sir;
Very, very nice work!
Harry B.
Harry Bonar is offline  
Old December 7, 2009, 10:06 AM   #6
alohamed
Junior Member
 
Join Date: December 7, 2009
Posts: 1
45-70 on shotgun action

Sir,
I built a 45-70 on a shotgun action as per the method laid out in Ellis Brown's excellent book, and in the process learned quite a bit of what actions I would use next time. I was fortunate in that I chose a good action for my first one. It came out excellent in every way, and I am very happy with it. I found that there is a hell of a lot more pressure generated when a rifle round fires as compared to a shotgun. I knew this intellectually, but not until I went through the process of building and proofing did I understand what that really meant. The action I used was an old, no name Spanish built 16 gauge hammer gun. It had the double bolt lock-up and the greener style crossbolt common on better European guns. These are items I consider necessary for such a conversion. My action also had side clips, which are cool and look great, but I doubt they add any stiffness to the action as intended. With the double underbolt lockup, and the greener crossbolt, I think almost any action would be sufficient. I would not use a dolls head third bolt, but some other third bolt styles would probably be OK, like the rotary style on the Fox's. But I would not make such a conversion unless there was a third lockup of some sort.

I would not use a 20 gauge frame at all. Too Small. I would probably not do it on a 16 next time, rather go with a 12 gauge action. All it takes is one failure to ruin your day. The firing pin holes really do need to be bushed. Both for safety and more importantly, because typically shotgun firing pins are larger in diameter and the higher pressure rifle primers extrude into the pin holes making the mechanism hard to open. Also this increases the chance of a ruptured primer. The pin on the gun I used was .125 in diameter. I am in the process of bushing it down to .080 now. After I am finished I will post some photos.

The thought that "just about any modern action will be strong enough" is a risky approach. The newer guns are often held together by adhesive, like some of the Beretta O/U the barrels are secured in the monoblock with Locktight. This works OK for shotguns, because there is not that much forward friction of the shot passing through the barrel trying to move the barrel forward. When you squeeze a 45 cal slug through a rifled barrel at 2000 FPS there is a lot of forward force. I am afraid the locktight method may fail under these conditions. Even if it passes proof, what is the fatugue life of these new cyanoacrilate adhesives? Will it fail after a hundred shots? A thousand? There is not enough steel in the monoblock to allow threading, so the whole shebang holds together on the strength of some glue. This worries me. I think a mechanical fastener is a better approach, such as the threaded and soldered assembly Brown shows in his book.

I have two other shotgun actions I am getting ready to start on. One is a Belgian Armaf 12 gauge side by side. The other is a Simpson 12 Guage side by side. They both have the double underbolt locking with greener type crossbolts. They also both feature side clips, although as I said, I do not think this is important. These are both fairly light guns, and I am sure the resulting rifles will be fine. There is not too much sense in going for absolute lightness in a double rifle in my opinion, as a heavier rifle points and steadies better in my opinion, as well as reduced recoil. My next rifle will be in 450 Nitro Express, so that has a lot to do with my thinking on this matter.

I looked at a number of other shotgun actions in my shop. One is about the sweetest pointing shotgun ever, a 12 Ga SxS Batavia side lock. But there are no underlocks at all on this gun, only a cross bolt. I just am not willing to risk all the work involved in this conversion on such a mechanism. I also have an old Remington SxS (1889 model I think) that could be used. It has a double underlock and a dolls head crossbolt. This action would probably be OK for a light cartridge, but it is too heavy an action. Who wants an 11 lb. double unless it is a dangerous game rifle?

So my recommendation based upon experience would be two fold: Get Ellis Browns book and follow his advice regarding action selection, and stick with European actions with the three lock mechanisms, or maybe an American action if it has a really strong lock up. And make sure to bush your firing pins.

There is an article in the double gun journal, volume 20, issue 3, page 59 that is worth reading. The author (Ken Owens) opinion is this conversion is something to stay away from. I disagree, but he makes some valid points all based upon his experience. Seeing photos of guns that blew up is always sobering too...

Another good article is in the latest issue of Machinists Workshop, which is the Nov-Dec 2009 Issue (I think) about converting a modern Berretta O/U into a rifle. This is made with the locktight glued system. It is an excellent article by a great machinist full of tricks and tips worth reading for anyone who is thinking of making a double rifle. I highly recommend this article along with anything else you can find on the subject. This is a big job and a lot depends on doing it right, so get all the advice you can from people who have actually done it.

Good Luck with you new double! Maybe we will meet up over a campfire in Darkest Africa someday!
alohamed is offline  
Old December 9, 2009, 07:42 PM   #7
GUNSLINGER 67
Junior Member
 
Join Date: December 9, 2009
Location: Dover Foxcroft,Maine
Posts: 8
Good info alohamed..........thank you.

This type of project has interested me for some time now. I've been meaning to pick up Ellis Browns book for awhile , but I guess I keep hoping it will turn up in a book store (fat chance)

I had the pleasure of running across this shop around the corner from where I was hunting a few weeks ago........... http://www.jwhitegunsmithing.com/custom.html ........and talked to the owner for a bit. He was in the process of building another double rifle from a SxS ....this time in 45-120 .....it was beautiful , quite heavy......and very rugged looking with the new breach block.
__________________
a.k.a. - ULTRAMAGBRION
Μολὼν λαβέ"

"Free men will never consent to giving up the means of defending their liberties!"
GUNSLINGER 67 is offline  
Old December 10, 2009, 01:22 AM   #8
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
As long as you stay outta the Wagon Wheel, gunslinger, you'll be OK.

.
PetahW is offline  
Old December 10, 2009, 12:57 PM   #9
GUNSLINGER 67
Junior Member
 
Join Date: December 9, 2009
Location: Dover Foxcroft,Maine
Posts: 8
Ya mean the Broken Spoke ?

Never been there but my S/O (who has lived up here for 19 years) has joked about that 'hole'.
__________________
a.k.a. - ULTRAMAGBRION
Μολὼν λαβέ"

"Free men will never consent to giving up the means of defending their liberties!"
GUNSLINGER 67 is offline  
Old May 1, 2010, 02:33 PM   #10
sowbelly#60
Junior Member
 
Join Date: April 29, 2010
Location: franklin, indiana
Posts: 2
dear, bswiv
love your ruger double 45/70 rifle. would like to know gunsmith who made it,so maybe i could get me one. thanks a lot jeff
sowbelly#60 is offline  
Old May 1, 2010, 02:50 PM   #11
kodiakbeer
Junior member
 
Join Date: April 10, 2010
Location: Kodiak, Alaska
Posts: 791
Baikal used to offer a set of sights and .45/70 insert package for their doubles. The inserts were actually made by an Italian firm (Tanfoglio?) for the Baikal guns and they were only rated for the standard factory .45/70, not the high pressure loads.

The way it worked was, that one insert was rigid and simply screwed into the barrel using the choke screws, while the other was adjustable with various offsetting rings so you could move the point of impact to match the first barrel.

It was not as aesthetically pleasing as an actual double, but it was relatively inexpensive. If I recall correctly, the insert package (with sights) went for about $140, and at that time, the Baikals were going for about $250, so you had a double rifle for about $400.

They worked, but I don't know if they're still available. I helped set up a couple of guns when I worked in a gun shop and the owners were happy with the results. I think the only thing most people couldn't do themselves, was drilling and tapping the sights.
kodiakbeer is offline  
Old May 23, 2010, 12:04 PM   #12
sowbelly#60
Junior Member
 
Join Date: April 29, 2010
Location: franklin, indiana
Posts: 2
my new double

hello,
instead of building a double off of a shotgun and being stuck with low power shells. i bought a sabatti mod 92 double in 45/70. a very nice double for the low price of $2995.00 . shoots great , points well , groups nice. comes regulated with winchester 300 grain hollow points at 50 meters. cabelas is only one that has them for now. was worth the wait.
sowbelly#60 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10398 seconds with 9 queries