The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 26, 2010, 03:53 PM   #1
gqpolo
Junior Member
 
Join Date: April 9, 2010
Location: Cleveland
Posts: 4
Help With Cleaning My Glock 19

I'm a complete novice when it comes to guns and this may be a stupid question but here goes:
I field stripped the gun and the part on the slide where the casings come out on the inside on the rear sight side there is what was a silver circle with a pin coming out. Do I clean all of the silver pieces so that they are sliver again? Is this possible? Right now they're pretty much black.
gqpolo is offline  
Old April 27, 2010, 01:42 AM   #2
Lavid2002
Senior Member
 
Join Date: April 6, 2007
Posts: 2,568
Take a nylon brush and some powder solvent like
*Hoppe's No. 9
*Break-free CLP
*Gun Scrubber
etc...
Place some solvent on the part and brush it like you were brushing your teeth. The majority of the fouling will come off. Cleaning every part until it is 100% clean is referred to as "White glove" gleaning. It is unnecessary.

Its a glock....clean it a little, lube it, slap it together and go enjoy it : )


This may help...
http://www.youtube.com/watch?v=_3TdaCGcmn0
__________________
Math>Grammar
Lavid2002 is offline  
Old April 27, 2010, 07:21 AM   #3
gqpolo
Junior Member
 
Join Date: April 9, 2010
Location: Cleveland
Posts: 4
Thanks for the advice
gqpolo is offline  
Old April 27, 2010, 05:23 PM   #4
vladan
Senior Member
 
Join Date: March 14, 2010
Location: Central Florida
Posts: 792
http://www.youtube.com/watch?v=LfeEn...eature=related
LOL funny as hell, couldn't help it :-)
vladan is offline  
Old May 2, 2010, 05:08 PM   #5
booker_t
Senior Member
 
Join Date: July 21, 2009
Posts: 797
One point to note.. when cleaning the slide after a field strip, many people like to place it in a downward position while scrubbing the "bolt face," where the firing pin is. This helps prevent any tiny brass shavings or carbon slipping into the firing pin mechanism by gravity.

There's also a small hole on the bottom of the slide, try not to get any schmutz in there either.

Read your manual about lube for the Glock, doesn't take much and just put it in the right places. You don't have to oil it down like most other weapons. Some good YouTube videos about it as well. Personally I like Gun Butter.
booker_t is offline  
Old May 9, 2010, 12:36 PM   #6
yrralguthrie
Member
 
Join Date: July 2, 2009
Posts: 56
video

The glock is cleaner than the bathtub he's washing it in.
yrralguthrie is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07775 seconds with 9 queries