The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 18, 2010, 09:01 AM   #1
N2GN2
Junior Member
 
Join Date: April 18, 2010
Posts: 4
Which MEC?

Hello all,

I'm looking toward your advice on which MEC reloader I should get for 12 g. I won't be reloading a ton right away, but I also would like to have a press that I will never need to upgrade. I'm very confident that I will never need a progressive. I think I have narrowed it down to a 600, sizemaster, and a grabber. I will be reloading for trap with a rem 870. I also expect to reload hulls that I find and ones that are given to me. Thank you for sharing your experience.
N2GN2 is offline  
Old April 18, 2010, 09:49 AM   #2
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,397
I really found the Mec 600 Jr. the easiest to use, and its quite quick for a non=progressive.

I use to shoot a lot of trap and skeet, I had one in 12, 20, 28, and 410. The 410 was a real pain in the butt to load for, so I didnt use it much.

I only have the 12 and 20 right now as I dont do that much shotgun shooting.

I bought my Mec 600 JRs in the mid 70s and they still work great today.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old April 18, 2010, 10:19 AM   #3
N2GN2
Junior Member
 
Join Date: April 18, 2010
Posts: 4
Do I need to worry about the better MEC having better resizing options?
N2GN2 is offline  
Old April 18, 2010, 10:20 AM   #4
rbernie
Senior Member
 
Join Date: August 10, 2004
Location: Plain Ol', TX
Posts: 713
Since I want the base resized, I use the 600Jr. The progressives will go faster, but you'll have to resize the bases off the progressive (which will obviously slow things down again).

I can crank out a pretty good amount per hour on the 600 Jr; maybe 150 per hour or so. That's about as fast as I need to go.
__________________
-A conclusion is not a destination, it's simply a convenient place to stop thinking.-
-Reading a thing doesn't automatically make it so; repeating it doesn't necessarily make it any truer.-
-Every Texan should be a member of the Texas State Rifle Association.
rbernie is offline  
Old April 18, 2010, 10:25 AM   #5
greco
Senior Member
 
Join Date: September 12, 2005
Posts: 125
I have 2 MEC models I have had for about 20 years or so. The are the model 9000, and they eject a complete round for each stroke of the handle. The base is resized at the first station. The loads look and perform beautifully.

One is manual and one has a spring/gas assist which turns it one station at a time. I kind of prefer the manual one because if you mess something up, it is easy to stop the sequence, fix the problem and get right back to it. This happens more often than you think. Sometimes a primer may get out, or upside down, or a wad won't enter correctly or something.

I have reloaded over 100,000 rounds with these 2 machines since I used to shoot skeet in tournaments all over the place. They still work just fine with no repairs.
__________________
NRA Pistol, Shotgun, Rifle Instructor

Last edited by greco; April 19, 2010 at 06:57 PM.
greco is offline  
Old April 18, 2010, 10:25 AM   #6
N2GN2
Junior Member
 
Join Date: April 18, 2010
Posts: 4
If I get the 600, is the primer feed the way to go? If it is, would it then be better to get the sizemaster?
N2GN2 is offline  
Old April 18, 2010, 05:12 PM   #7
l98ster
Senior Member
 
Join Date: March 1, 2010
Location: Hopewell Junction, NY
Posts: 452
i have both the sizemaster and the 600 jr. the primer feed is a must. DEFINITLY!!! also, the sizemaster will resize the brass on the first station and has a larger shot bottle.

So, if its a choice between the 600 and the sizemaster, go with the sizemaster.

However, if you plan ondoing a lot of trap and skeet shooting, I would step it up to a progressive. Dont get me wrong, the sizemaster can truck along pretty well, but I was shooting about 500 rounds a week, and the sizemaster was taking up a lot of my time.

-George
l98ster is offline  
Old April 18, 2010, 06:30 PM   #8
N2GN2
Junior Member
 
Join Date: April 18, 2010
Posts: 4
Thank you everyone for your help! I'm confident that the MEC Sizemaster is the shot press for me. I hope to order it soon!
N2GN2 is offline  
Old April 18, 2010, 06:43 PM   #9
rottieman33
Senior Member
 
Join Date: September 27, 2009
Location: New Hampshire
Posts: 223
I just got in to reloading shot shell and have a Mec 600 Jr. I did about 500 rounds in 4-6 hours taking my time. My dog kept wanting to play ball so that slowed me down a little. Do get the bottle supports for it. I had mine fall off on me and it made a mess of #8 shot all over the place.
rottieman33 is offline  
Old April 18, 2010, 08:06 PM   #10
Magnum Mike
Senior Member
 
Join Date: December 24, 2007
Location: Rochester, MN
Posts: 334
Quite a difference between a 600 and a grabber! I have both. I use the 600 for screw ups and handicap loads. The grabber is about as progressive as it gets only it does not auto index! I would never go back to the 600 for my main press.

Last edited by Magnum Mike; April 18, 2010 at 08:14 PM.
Magnum Mike is offline  
Reply

Tags
12 gauge , mec , reloading , shotgun

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08092 seconds with 7 queries