The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 11, 2010, 09:48 PM   #1
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 4,713
Fiberglass covered styrofoam stock

I am wondering if anybody knows who made a rifle stock that is on my Remington 700. It has a Styrofoam core, fiberglass shell, and glass bedding. It was on the rifle when I traded for it 30 some years ago. The stock is extremely light, maybe 1 lb. and has Pachmayr style flush QD sling swivels. I had the gun worked on a few years ago. Muzzle brake, Pachmayr pad, trigger job. matte bluing, etc. The smith that did the job remembered hearing of this stock, but couldn't remember who made them. The gun is incredibly accurate, light, and easy to shoot.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old April 11, 2010, 10:05 PM   #2
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 6,157
Brown Precision and Garrett Accuralite are 2 names that were 2 of the early pioneers making after market synthetic stocks. I have an old Remington 700 wearing one of the Garrett stocks. My brother had one of the Brown Precisions years ago. Both are very high quality. Brown precision is still in business www.brownprecision.com. I'm not sure about Garrett.
jmr40 is offline  
Old April 11, 2010, 10:18 PM   #3
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 6,157
I'm not sure how long they have been in business, but Mcmillan is another possibility. I've got a couple of rifles in their stocks. Currently they are probably making the best hunting rifle stocks. But I'm not sure they were in business that long ago. Unless I'm mistaken Brown was the first to make a quality fiberglass aftermarket stock.
jmr40 is offline  
Old April 11, 2010, 10:21 PM   #4
SVO
Senior Member
 
Join Date: December 20, 2009
Location: Texas Gulf Coast
Posts: 694
If it has an aluminum bedding block, it's probably made by HS Precision.
SVO is offline  
Old April 12, 2010, 11:52 AM   #5
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,532
There were quite a few fiberglass stocks on the market in 1980. Chet Brown of Brown Precision introduced fiberglass stocks in 1968, and after a few years there were some imitators. My first fiberglass stock was purchased from Chet Brown back when he was in San Jose, then I tried a few from Ultralight, then one from a maker in the midwest somewhere. Finally found Lee Six and bought stocks from him until he retired a couple years back, his stocks are available from Kelbly's now. Most use a polyurethane foam as filler, not Styrofoam. Lee Six used an epoxy foam that really made the stock rigid. Not the lightest stock, but very good.

McMillan stocks have always been injected foam with glass fibers, similar to the HS Precision stocks only without the aluminum blocks.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old April 12, 2010, 12:00 PM   #6
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,815
HiTec Specialties is a nice stock.I have used some Garrett Accralites.They were nice,too
HiBC is offline  
Old April 22, 2010, 09:04 AM   #7
LongRifles, Inc.
Senior Member
 
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195
Early McMillans were done this way. I have a 1985ish vintage M-40 that has a foam core with a layer of bisonite over the top.

I used it for my medium weight sniper rifle. I didn't trust it so I gutted the thing and laid up a whole mess of carbon ribbon and twill weave from one end to the other.

It now doubles as a baseball bat!
__________________
LongRifles, Inc.
"More than a business,
This is a lifestyle."

www.longriflesinc.com
LongRifles, Inc. is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07340 seconds with 7 queries