The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 28, 2010, 04:58 PM   #1
midnight1415
Junior Member
 
Join Date: March 28, 2010
Posts: 3
.38 &.357 mag brass

Hi new to forum, and reloading. Where can I find used .38 brass besides local ranges. They just won't sell any. And why no outside brass. Won't a go in the tumbler clean them up? Any advice helpful. Yes I read got some books. Now lookin for ammo components.
midnight1415 is offline  
Old March 28, 2010, 05:16 PM   #2
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,932
midnight1415

Welcome to TFL !!!!!

Goggle gun forums & start cruisin the classifieds & brass is exchangin hands every day!!

Now for finding primers is a gamble !!
__________________
GP100man
GP100man is offline  
Old March 28, 2010, 05:19 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,485
Welcome to the forum.

Pistol brass is nowhere near as critical as rifle brass. Even those of us who are purists with rifle brass and won't mix lots or load history, will scavenge every piece of pistol brass we can find on the ground if it fits a gun we own, and clean it up. Unless it's been there so long it has been corroded through or turned very dark brown, it usually works fine, and for low pressure loads like .38 Special target loads, even the deeply tarnished stuff often works. Just watch for cracks and splits. So, I don't know where you got the idea it might be otherwise?

Some indoor ranges don't allow you to police brass from beyond the firing line for safety reasons (the range is constantly hot). But most outdoor ranges don't have target runners, so they have to hold cease-fires to change targets then. Everyone polices brass when they do. If you are the only person at an outdoor public range you can usually pick up all you want.

If you are looking for new brass, Midway has it.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old March 28, 2010, 05:45 PM   #4
NCMountain
Senior Member
 
Join Date: December 30, 2009
Location: western, NC
Posts: 121
Sent you a PM.
__________________
Ruger GP100 4" SS; Ruger LCP; http://ncmountaingunner.blogspot.com/
NCMountain is offline  
Old March 28, 2010, 05:57 PM   #5
Blue Grass
Senior Member
 
Join Date: August 12, 2009
Posts: 370
Some local gun shops sell once fired brass. Most of my brass is from ammo I bought before the Obamanation of America. I have a lot of range pickups,too. You could always buy new brassuntill you get enough to get started. Good luck.
Blue Grass is offline  
Old March 28, 2010, 08:56 PM   #6
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,932
See there what I mean, NCMountain chimed in!!
__________________
GP100man
GP100man is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06800 seconds with 7 queries