|
May 9, 2010, 12:53 PM
|
#1 |
|
Member
Join Date: December 21, 2009
Location: Colorado
Posts: 47
|
Colt Mustang Extractor
My Colt Mustang Extractor broke at the range this AM. I've got e-mails in to Brownells and coltparts.com. Tried Numrich but it's listed as out of stock.
Anyone know of any other sources? Thanks for your help Dave |
|
|
May 9, 2010, 02:13 PM
|
#2 |
|
Senior Member
Join Date: August 4, 1999
Location: Houston, Texas
Posts: 2,567
|
That is one of the hardest parts to find for the little colt 380's.
Try Jack First's as I have heard he may have a few. I have been on the hunt for a spare for several years and not found one. Last time I checked Jack First's (maybe a year back or so) he was out and I just have been keeping an ear to the ground to try and find one. Maybe a 238 extractor would fit?
__________________
10mm and 357sig, the best things to come along since the 38 super! |
|
|
|
May 9, 2010, 03:06 PM
|
#3 |
|
Senior Member
Join Date: January 23, 2008
Posts: 713
|
try here; i've used them before.
http://www.coltparts.com/pt_380semiauto.html according to the schematics the sig238 part should fit, may not be drop in though. good luck with it!
__________________
http://takdriver.com/ |
|
|
|
May 9, 2010, 03:47 PM
|
#4 |
|
Member
Join Date: December 21, 2009
Location: Colorado
Posts: 47
|
Thanks Guys,
I'll call Jack First on Monday. I was wondering if the P238 part might fit. I was also figuring it might require some work if it did. If I find anything I'll post back. Dave |
|
|
|
May 10, 2010, 11:50 AM
|
#5 |
|
Member
Join Date: December 21, 2009
Location: Colorado
Posts: 47
|
Just got off the phone with Jack First. They have the extractor in stock aith shipping it cost me 53.50. It is stainless not blued but it's the only game in town from what I can find out.
Dave |
|
|
 |
| Thread Tools | |
|
|
