The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old January 30, 2010, 01:57 AM   #1
bigwrench
Senior Member
 
Join Date: December 23, 2009
Location: foot of the uintas
Posts: 140
hastings grooved barrells

Hastings used to make shotgun barrells with grooves cut in them, like rifleing without the twist, claiming shot column stableizing from the grooves helped with pattern and range. I have come to believe that those claims must have been false, as no manufacturer sells shot guns with grooved barrels, that I am aware of. But the theory, to me, seems sound. Anyone tryed or used a barrel like this? And, if so, was better patterning acheived?
bigwrench is online now  
Old January 30, 2010, 03:45 AM   #2
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,382
Since Hastings tossed in the towel and has closed their doors for good, there's little chance of getting a new straight rifled barrel from them. But, that doesn't mean the idea of straight rifling is dead. No, far from it. The innovative Jess Briley has been selling straight rifled tubes in his Ultimate Ultralite tube sets ($1,750) for a some while.

I've not tried them. They may be like porting, some folks will think they work wonders while others think it's a bunch of hooey. There's a big difference between spending $35 to port your M-500's barrel to see if you like porting, and spending $1,750 to test some straight rifled tubes. This may be another situation where the results are so subtle that only top-notch shooters (and some wannabes) will notice the difference.

Any of you Triple-A NSSAers out there used the straight rifled Briley UUs?
zippy13 is offline  
Old February 1, 2010, 12:31 PM   #3
Shotgunaholic
Junior Member
 
Join Date: November 22, 2009
Posts: 10
About four years ago I purchased a Hastings Wadlock II 28" barrel for my 12 ga Wingmaster magnum. It came with three tubes. Since I bought the Hastings barrell the original 30" full barrel has not been on the gun. I have never patterened either barrel. From what I can tell, the Hastings barrell gives more solid clay breaks than the original Rem barrell. The Hastings barrel has a 3" chamber so I didnt sacrifice anything. I havent hunted with the Hastings barrell so I cannot comment on that. All said and done I am happy with the Hastings barrell, to bad they closed up shop.

That is my 2 cents worth.
Shotgunaholic is offline  
Old February 1, 2010, 01:38 PM   #4
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,340
One of the more upline Italian gunmakers sold a shotgun with a grooved barrel some years back. Supposedly, it worked as advertised. It's more expensive, of course, so gunmakers who are trying to produce a gun to sell to the WalMart shoppers would never do it.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 1, 2010, 01:40 PM   #5
oletymer
Senior Member
 
Join Date: September 9, 2005
Posts: 334
If they worked that well most competition shotguns would have them. Hint, they don't.
oletymer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06729 seconds with 7 queries