The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old January 15, 2010, 04:38 PM   #1
CK_32
Senior Member
 
Join Date: April 11, 2009
Location: Orange County, Ca
Posts: 450
MOA or Clicks adjustments.

Whick is better
Iv seen scopes that come in... im pulling up a blank but there was a either a click adjustment and a MOA adjustment or somthing like that. Whats the difference and what would. I thought there was just MOA adjustment but some site offered a click or somthing else adjustment or the MOA version.

Im pretty familiar with the MOA adjustment but clicks?
And if there are other types please feel free to add them in and explain the differences because i had no clue other adjustments even existed.
__________________
Bullet placement over bullet wastement
CK_32 is offline  
Old January 15, 2010, 04:41 PM   #2
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,494
As far as I know, "clicks" is just jargon for the smallest unit of adjustment.

One "click" is 1/4 inch, or 1/4 moa, or 1/8 inch at 100 yards.

Some scopes actually "click", some don't. Most do.

A "click" is the smallest increment, regardless.

If you're 1/2 inch off at 100 and the adjustment is 1/4 inch at 100, then it's 2 "clicks".

Of course, there's also a "klick", which is jargon for a kilometer, but that doesn't have much to do with a scope.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old January 15, 2010, 04:45 PM   #3
zoomie
Senior Member
 
Join Date: January 23, 2006
Location: WY
Posts: 1,745
You can get adjustments in mils, also. They're used the exact same, just different quantities.
Quote:
Originally Posted by http://demigodllc.com/articles/practical-long-range-rifle-shooting-optics/?p=2
Instead of measuring hold-over in terms of linear distance (inches or cm), it would be helpful to translate those linear distances into units of angular measure. The concept of angular measure is that an angle of 1 degree demarcates 1.7 yards at 100 yards, or 3.5 yards at 200 yards. Everyone with a basic understanding of geometry should understand how angles work.

There are two units of angular measurement commonly used in rifle scopes. The first is the "minute of angle." Dividing a circle into 360 degrees, then each degree contains 60 minutes. One MOA demarcates 1.0472" per 100 yards of distance.

The second is the "mil". One mil is one part transverse per 1000 parts distance. In units we understand, 1 mil is 3.6" per 100 yards (ie, 100 yards is 3600", one thousandth of which is 3.6"). Consequently it's also 1 yard at 1000 yards. Alternatively, in metric, 1 mil is 10cm per 100 meters, or 1m at 1000 meters.
Quote:
Originally Posted by http://demigodllc.com/articles/practical-long-range-rifle-shooting-optics/?p=6
In principle, either system can be used. If you're thinking about or communicating elevation values (for example looking at data and then dialing or holding off), a typical elevation value in MOA for 308 looks like "11.25" which is four digits, but the same mil-based would be just "3.2" or two digits. (In fact you can go out to over 1000 yards before needing more than two digits of elevation in mils.) This is less information to process.
zoomie is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07319 seconds with 9 queries