The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old January 6, 2010, 05:22 PM   #1
Cowtown44
Member
 
Join Date: January 3, 2009
Posts: 46
Elbow and Knee Pad Recommendations?

It's probably in here somewhere but evades the search function. What are your recommendations for elbow and knee pad recommendations for multi-day training courses. Thanks in advance.
Cowtown44 is offline  
Old January 6, 2010, 06:47 PM   #2
mskdgunman
Senior Member
 
Join Date: December 28, 2008
Posts: 127
http://www.dextermeadows.com/

I started using these a few years ago and like them. I always hated regular knee pads as the straps irritated the backs of my knees. Also, if I made them tight enough so they didn't fall off, they cut off my circulation.
mskdgunman is offline  
Old January 6, 2010, 10:45 PM   #3
Double Naught Spy
Senior Member
 
Join Date: January 8, 2001
Location: Forestburg, Montague County, Texas
Posts: 10,423
Unless you are going to a lot of courses or have other uses for the pad other than the training class, there is a very good chance you can get away with buying some of the least expensive Wal-mart, Academy, etc. pads.

At Academy, you can try on some of they ones they have out for sale and figure out if you are going to have pinch or snugness issues.

The last time I used pads, I went with briar pants (thick fabric) and did not wear knee pads and used by 7 year old daughter's skating knee pads for elbow pads and did great. It has been my experience that knees in a good pair of jeans will suffer a lot less than bare elbows.

Of course, if you are going the longer term or heavy use route, you might do much better getting higher quality gear, but it is going to cost a lot more. I have been in classes with guys who have complained about the cost as they ONLY wore them during classes and at no other time, though one guy did admit to wearing he SWAT knee pads for gardening, noting that gardening was the only other time he needed them.

Whether cheap or quality, it is important that you can try them on before your class. You don't want to diminish your class experience because of a bothersome need to adjust loose, binding, slipping pads.
__________________
"If you look through your scope and see your shoe, aim higher."
-- said to me by my 11 year old daughter before going out for hogs 8/13/2011
Double Naught Spy is offline  
Old January 6, 2010, 10:48 PM   #4
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,343
I started wearing them for paintball, and what a godsend...Mine are "Trace" brand, and I got them from Big 5, IIRC.

Check out Craigslist in your area, and make an offer. If that fails, M Carter Brown has lots of used paintball gear for sale cheap.
Slopemeno is offline  
Old January 9, 2010, 02:27 PM   #5
Pigaloo
Member
 
Join Date: January 9, 2010
Posts: 19
I have been disapointed by most I have tried but those dexter ones look interesting. I may give those a go.
Pigaloo is offline  
Old January 11, 2010, 05:57 PM   #6
macsr01
Member
 
Join Date: May 22, 2006
Posts: 72
I have Hatch XTAC elbow & Knee pads. They are comfortable and not to bad on price.
__________________
YOUR REALITY CHECK BOUNCED, I'M HERE TO COLLECT THE BALANCE............
macsr01 is offline  
Old January 11, 2010, 11:22 PM   #7
eagleno49
Member
 
Join Date: February 9, 2009
Location: St. Louis
Posts: 20
Go to home depot or lowes and get some good contractor grade knee pads. They are made to be worn all day.
eagleno49 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06634 seconds with 7 queries