The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old January 5, 2010, 09:24 PM   #1
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
comfort carry holsters - a review

The list of Hybrid Holster makers is a relatively short one. Some of the Holster Industry's top names come to light with a quick Google search, Tucker, Comp-tac, Hoffner's, and Crossbreed are pretty much the top three that have been recommended in the past.

I'd like to introduce you to (clickable image)


During a very extensive search for a in the pants holster to fit my glock 19 AND mounted Streamlight TLR-1, I ran across Rob Durham. When I first contact Rob he was in the process of moving his shop into the back of one of his local gun shops. This move has enabled him to make holsters for pretty much anything that the shop might carry.

After hammering out all the details of what I was looking for Rob was able to put together a mold for my combination and for future use


Due to the holidays and complications with my local post office having extended holiday hours, I wasn't able to get the holster till 1/4/2010.

The holster is constructed from a thick grade of cowhide leather and .093 thick kydex.



Instead of leaving a waxed backing on the holster Rob has mated a second layer of leather for added comfort. It does not affect the flexibility of the holster.


It doesn't affect the thickness either. This holster is fairly thin.
urbantacticalgear is offline  
Old January 5, 2010, 09:25 PM   #2
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
As pictured below you can see the layers in the lower left. I think I would have liked to see him run a row of stitching In the sculpted track running the entire perimeter of the holster, but we'll see how it holds up in the long run as is.


The Holster is set up for adjustable ride height and/or cant. It has Three holes on each side to adjust the placement of the belt clips.


All of Rob's holsters allow you to tuck your shirt in, further concealing your sidearm. Note the gap between the clip and holster backing.


Something I really thought was a good idea was adding a lip to the bottom side of the holster. Some manufacturers leave this off, depending on the tightness of the holster for retention.



The holster Features a sweat guard. As of right now there is not a "combat cut" like cross breed offers. But I have a feeling it will be an added feature in future holsters. It does not effect the draw, but would be a tad more comfortable on first "grab".
urbantacticalgear is offline  
Old January 5, 2010, 09:26 PM   #3
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19



More pics to come, including mounted pictures, and initial wear thoughts.

brought to you by:
urbantacticalgear is offline  
Old January 6, 2010, 07:09 PM   #4
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
After playing with the cants I finally settled in on the front clip all the way to the top and the rear clip in the middle position. It provides a slight cant, and makes the weapon print ALOT less.

The Following Series are taken at the 3 o'clock position. That is directly on the hip. You'll notice in this position that it "squares off my side". Also note the bulge around the pocket. This position is NOT okay while seated. The grip and sweat guard tends to push into my side in this position while seated.


From the rear in this carry position the weapon is still visible, but not as much


Same carry position while wearing a t-shirt:


urbantacticalgear is offline  
Old January 6, 2010, 07:10 PM   #5
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
And Finally Tucked. Again note the bulge at the pocket:




The next series is my personal favorite. Around 4-430 carry position. In this position there is little to no bulge in the pants, and the grip is pulled tightly against the body.


urbantacticalgear is offline  
Old January 6, 2010, 07:12 PM   #6
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
Position 4 with a t-shirt covering




Position 4 with the shirt tucked in:


urbantacticalgear is offline  
Old January 6, 2010, 07:13 PM   #7
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19


The final position I tried out was the small of the back. There is next to no print, no bulge, but was a tad uncomfortable, due to the length, while seated.



SOB with the shirt tucked in:



and finally drawing from the small of the back position:
urbantacticalgear is offline  
Old January 6, 2010, 07:14 PM   #8
urbantacticalgear
Member
 
Join Date: January 5, 2010
Posts: 19
urbantacticalgear is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07519 seconds with 7 queries