The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old January 5, 2010, 08:41 PM   #1
ace102
Junior Member
 
Join Date: January 5, 2010
Posts: 1
H&R "Premier" top break .22 7 shot

I have inherited this gun. it is nickel plated revolver and a top break 7 shot. It is the "old model" and it need some parts. I ordered a trigger spring for it which is the flat style spring. My gun did not have one when i got it. I ordered the part along with a schematic from Numrich but the schematic is the for a .38 and apparently they dont have a schematic for the old 7 shot .22. How in the heck does the trigger spring go in???? I have set at the desk and played with it for hours. Any pics would be great..... I am lost totally. I do have a link of the trigger spring.
ace102 is offline  
Old January 13, 2010, 09:27 PM   #2
bop
Member
 
Join Date: September 16, 2009
Location: arizona
Posts: 34
Ace102-H&R .22 Breaktop 7 Shot

Easy one! The flat end goes in the groove on the lower grip frame towards the trigger guard with the "belly" of the spring facing the back strap. Put the contoured end into the hammer "V" first & then push the lower end towards the groove & slide in from the side. Should be pretty easy. Also you can contact Jack First,Inc. for a diagram & parts. Good luck!
If you need a diagram e-mail me at:rcgburns@cox.net & I'll send you a copy .

Last edited by bop; January 13, 2010 at 09:32 PM. Reason: added e-mail address.
bop is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05909 seconds with 7 queries