The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old November 8, 2009, 09:10 AM   #1
JWT
Senior Member
 
Join Date: March 16, 2007
Location: Tucson, AZ
Posts: 3,151
Offset scope mount

Family member recently lost sight in his right eye. He's not inclined to learn to shoot left handed as he's almost 70 yrs. old. Does anyone know where to find a decent offset scope mount that would allow him to use his left eye while shooting right handed?
JWT is offline  
Old November 8, 2009, 09:42 AM   #2
Bailey Boat
Junior member
 
Join Date: December 10, 2006
Location: NC
Posts: 365
Even if such a creature did exist the bullet path and the optical plane would only intersect at one specific range. Before, or after that specific point it would be off target dramaticly.....
Bailey Boat is offline  
Old November 8, 2009, 09:57 AM   #3
fisherman66
Senior Member
 
Join Date: August 22, 2005
Location: Rhome, TX
Posts: 4,641
I've seen a stock designed for a right handed shooter with a left eye dominant trait. The buttstock was scalloped out. I wouldn't dare use this kind of stock with a rifle with any significant recoil. I'd stick with 7-08 levels or lower.
__________________
la plus belle des ruses du diable est de vous persuader qu'il n'existe pas!
fisherman66 is offline  
Old November 8, 2009, 11:14 AM   #4
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,344
I've seen stocks bent using a stam box to allow a shooter that lost his sight in his dominant eye- I've also seen an offset mount.

Talk to your local gunsmith. I really don't see a huge issue with making a plate that would offset the scope a few inches to the left. I certainly would have undertaken a project like this. Props to your family member for not letting his diability get him down.
Slopemeno is offline  
Old November 8, 2009, 11:16 AM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,860
Restock the rifle as suggested.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old November 8, 2009, 11:22 AM   #6
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,600
Slopemeno + 1
Know such a feller that hunts ducks and coyotes as he became blind in his dominant eye. Have seen his offset goofy shotgun but not his rifle. According to him, they work and the brain got reprogramed just fine.


Be Safe !!!
Pahoo is offline  
Old November 8, 2009, 04:10 PM   #7
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,344
I fly r/c sailplanes heavily, and my friend/mentor was flying with us one day at a semi-secret spot. "Hey.." he said "Somethings...somethings going on with my eye"

His retina had just collapsed. He had numerous surgeries, staplings, laser treatments and so on for a year. Nothing worked. He finally had to live with the loss of the vision in that eye. He's still the hottest (not to mention crankiest) pilot on our hill, and flies combat with one eye better than I do using two eyes.

My hat's off to people who don't take it lying down.
Slopemeno is offline  
Old November 8, 2009, 04:41 PM   #8
drogo
Junior Member
 
Join Date: November 8, 2009
Location: Middle of Tenn.
Posts: 1
New guy here. My G/F shoots that way, (R.hand/L. eye)
I have seen a setup like that awhile back. Looked like aluminum(?) arms attached to the rifle (cut-down scope
mounts?). At the other end a Weaver rail is mounted.
The distance from the rifle to the scope only has to be a
couple of inches, if that. Look at scopes mounted on ARs
carry handles, they are at least 2 inches above the barrel.

Any way, I work for a Heat Treat Co. as a ship'g/rcv'g clerk
and material movement technician (truck driver). Found
this Forum through another and it seems to be a very good
site.
drogo is offline  
Old November 9, 2009, 03:48 PM   #9
THEZACHARIAS
Senior Member
 
Join Date: January 26, 2009
Location: Louisiana
Posts: 537
They are used commonly in paintball in order to mount an optic on a marker with a feedneck at the top of the frame. Most any of the big scenario paintball online stores will have them. Cant speak to durability, but they're generally machined out of aluminum.

Here's a link with a few examples...
http://www.rockstartactical.com/category_s/143.htm
THEZACHARIAS is offline  
Old November 9, 2009, 06:04 PM   #10
Slopemeno
Senior Member
 
Join Date: January 19, 2007
Posts: 2,344
Ah, I pre-date the "center-feed" era of paintball. The hot setup back then was to order a left-hand autococker to keep your feeder behind the bunker.
I even built a "powerfeed" (ala-Airgun Designs, welded, not a bolt-on) that move the feed to the left side of the gun on one customers cocker.

Good to know, in any event.
Slopemeno is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08980 seconds with 9 queries