The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old September 22, 2009, 04:36 PM   #1
daleo8803
Member
 
Join Date: August 3, 2009
Posts: 78
lube

ok i was given a lee mold for .358 158 grain SWC. it is a tumble lube style boolit. is there a way to make a liquid bullet lube or do have to buy some?? can case lube be used in the place of a bullet lube?? thanks

dale
daleo8803 is offline  
Old September 22, 2009, 04:54 PM   #2
QBall45
Senior Member
 
Join Date: April 5, 2008
Location: South Central Minnesota
Posts: 583
Case lube? I've not heard of that before.

I use Lee liquid alox. About $3 for a small bottle. A little goes a long way.

I've heard of guys making their own lube, but I'm not sure how they do it.
QBall45 is offline  
Old September 22, 2009, 06:52 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,281
There are lots of lube recipes, but they are usually in stick form and assume you bought a lubricator/sizer to final size the bullets and apply the lube. An alternative to Lee Liquid Alox is White Label Xlox. It's actually exactly the same thing from the same industrial source, but White Label sells larger quantities for less ($10 a quart).
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old September 22, 2009, 09:55 PM   #4
trip_sticker
Member
 
Join Date: August 28, 2009
Posts: 88
If you have a friend or contact on active duty in the military in any mechanic position, see if they can grab you some Amalguard, Grade 4. It is the exact same thing as ALOX, comes in a silver 1 qt can and is everywhere in the service. They use it for corrosion protection on aluminum parts.
trip_sticker is offline  
Old September 23, 2009, 09:25 AM   #5
daleo8803
Member
 
Join Date: August 3, 2009
Posts: 78
thanks guys! i will look into those lubes!!

dale
daleo8803 is offline  
Old September 23, 2009, 10:39 AM   #6
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,923
TL

johnson paste wax will give good results on a TL bullet if pushed to 1,000 fps or slower .

warm the bullets toss in container teaspoon of jpw .
i then stand em on end on wax paper to let em dry .
__________________
GP100man
GP100man is offline  
Old September 23, 2009, 11:42 AM   #7
Citywaterman
Member
 
Join Date: March 30, 2009
Posts: 99
I have the same mold. I use Alox lube. A small bottle for a few bucks. I still have a half a bottle and have casted at least 3000 - 4000 bullets (maybe more). I tumble lube about 200 bullets at a time, size them with a sizing die and tumble lube them once more and let them dry overnight before loading them. Citywaterman

Attached Images
File Type: jpg Sizing kit.JPG (79.9 KB, 105 views)

Last edited by Citywaterman; September 23, 2009 at 11:48 AM.
Citywaterman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07032 seconds with 8 queries