The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old August 26, 2009, 06:32 PM   #1
pinetree
Senior Member
 
Join Date: March 5, 2001
Location: Cumming GA
Posts: 625
Beretta 686 vs. Browning Cynergy

I have been wanting a Beretta 686 White Onyx for some time now. A buddy has a Cynergy and it is very nice. I can get the Cynergy for $400 less than the Beretta. My priority is hunting, then clays. I have a semi Beretta 390 that is 12yo and is my primary dove, duck and goose gun. Either gun would be field grade.

edit - Just noticed the Cynergy for the great price only has a 26" barrel... Does that saw the jury?


Thanks,
tjg

Last edited by pinetree; August 26, 2009 at 06:44 PM.
pinetree is offline  
Old August 26, 2009, 06:39 PM   #2
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
You really need to shoot both of them to see which one fits you better. Both are great guns, but their typical stock dimensions are not similar - typically, if one of them fits you well, odds are the other will not. In that price range, you may also want to consider a SKB:

http://www.skbshotguns.com/over-and-...ield/index.php
oneounceload is offline  
Old August 26, 2009, 06:44 PM   #3
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,221
I'm a Browning guy - but OneOunce is right - if one fits you, the other one probably will not fit you. Your key issue here is Fit - not how they look - and you need to know the drop at comb, drop at heel, length of pull etc that fits you - or they both may be a mistake for you. Shotguns do not come in one size fits all .......

I'm also not a big Cynergy model fan / most of my guns are from the Citori model lineup - and while I think the jury is still out on the longevity of the Cynergy lockup system, it seems to be doing just fine.

As you probably realize, there are a lot of models of the Cynergy out there ( 17 in the current catalog ) / and in the 686 too ..... If you can, shoot similar models and see if they fit / take them to a patterning board if you can / you can't tell by shooting targets.
BigJimP is offline  
Old August 26, 2009, 06:50 PM   #4
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,221
Barrel length - if its too short, I tend to "whip" the gun vs "swing it smooth" - and a 26" O/U is too short for me / but I'm 6'5" and 290 lbs .. and I like my O/U's in 30" barrels at about 8 1/2 lbs for a general purpose gun hunting birds, Skeet or Sporting Clays.

But all that's a personal choice / some of my buddies shoot 26" barreled O/U's and they think my guns are like big overweight sewer pipes out there ...

A longer barrel to me, helps me with the longer sight plane - so the lighter the gun, the longer barrel I want as well. I have a 7.2 lb Benelli semi-auto / very light gun in 12ga / and I bought it in a 30" barrel - and added 1 lb to it so I could swing it smoothly. My 17 year old grandson / thinks its the coolest gun in my safe - he loves it / and he isn't that big yet .....so a lot of this comes down to personal preference...
BigJimP is offline  
Old August 27, 2009, 02:15 AM   #5
Lawyer Daggit
Senior Member
 
Join Date: December 5, 2004
Posts: 1,181
I agree with one ounce.

I love Brownings but find that their shotgun stocks tend not to fit me as well as Beretta stocks- I own two 686's- an untralight and a silver pigeon sporting.

I can heartily recommend the Beretta's.
Lawyer Daggit is offline  
Old August 27, 2009, 02:52 AM   #6
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,521
I'm not much of a shotgunner,but I'd have to agree the way to choose between platforms is "What fits"
I do not know the Browning,but I can say my 686 Essential has served me well for many years.Its a 26".I don't really sight and use technique.I focus on the bird,mount and shoot.I tend to use Skeet 1 and IC or IC and Mod
HiBC is offline  
Old August 29, 2009, 12:52 AM   #7
olddrum1
Senior Member
 
Join Date: March 23, 2008
Location: Mid Missouri
Posts: 782
Go with the 686 over this particular model of Browning.
olddrum1 is offline  
Old August 29, 2009, 10:58 PM   #8
sjeeperman
Junior Member
 
Join Date: May 25, 2008
Location: Louisville Ky
Posts: 9
I own both a Silver Pidgeon & the Browning Cynergy in 12ga. Both are 28" barrels. The Cynergy is heavier but I think it swings better. It happens to fit me better due to the fact of stock adjustability. Also, the Browning still has that $500 goody/rebate deal going on if I'm not mistaken ?

As someone has stated before, shoot both and buy what fits you.
__________________
Got to love the smell of gunpowder in the morning.
sjeeperman is offline  
Old August 31, 2009, 05:00 AM   #9
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
JMO, but the 686 is the world's gold standard for svetely-designed, great-handling, O/U shotguns - especially in the smaller/scaled framed frame gauges, like 20.

The Cynergy is just the latest hype/buzz in Citori's - arguably the runnerup (in Citori standard models).

.
PetahW is offline  
Old August 31, 2009, 05:08 AM   #10
Skan21
Senior Member
 
Join Date: May 29, 2009
Location: New Hampshire
Posts: 463
Hey OneOunce, why didn't you reccomend the SKB's to me? Any reason?
__________________
"An armed society is a polite society. Manners are good when one may have to back up his acts with his life."- Robert Heinlein

Some of you guys need to trade in a few of those Safe Queens and see if you can get a good deal on a Sense of Humor.- Me
Skan21 is offline  
Old August 31, 2009, 06:16 AM   #11
Waterengineer
Senior Member
 
Join Date: February 7, 2006
Location: Aurora, CO and Palm Beach, FL
Posts: 861
Ouch! That's going to leave a mark.
Waterengineer is offline  
Old August 31, 2009, 09:02 AM   #12
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
Quote:
Hey OneOunce, why didn't you reccomend the SKB's to me? Any reason?
Which thread? OK - hey Skans, look at the SKB's!....

I own two - great guns for the money.....I will say my oldest shoots my 20 better than I do......
oneounceload is offline  
Old August 31, 2009, 03:19 PM   #13
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,221
quoted from above: "the Beretta 686 is the world's gold standard for svetely-designed, great-handling, O/U shotguns - especially in the smaller/scaled framed frame gauges, like 20"

I'm not saying the Beretta 686 isn't a decent gun ...but I don't feel like I purchased a "non gold standard gun" - in the Browning Citori XS Skeet family - with a 20, 28ga or the .410 .....

Here is my family of XS Skeet model Citori's ( in 12, 20, 28ga and .410 ) - the 20, 28ga and .410 are all built on the Browning 20ga receiver - and all 3 have 30" barrels / they're my primary guns for Skeet, Sporting Clays and bird hunting ..... I find them to be solid, nimble and great handling guns .....that I'll stack up against any 686 made. Beretta 686 feels small in my hands and has way too much drop at comb and heel to fit me .......

http://www.thefiringline.com/forums/...1&d=1236031020

Both Beretta and Browning make good serviceable guns ...but if you're looking for the "gold standard" in a 20ga -- maybe the Krieghoff K-20 ....

http://www.krieghoff.com/index.php?o...d=32&Itemid=77
BigJimP is offline  
Old September 1, 2009, 08:14 AM   #14
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
Beretta vs Browning.

Ford vs Chevy.

Get the one that feels best to YOU...
Dave McC is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08760 seconds with 7 queries