The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old August 21, 2009, 08:53 AM   #1
IllinoisCoyoteHunter
Senior Member
 
Join Date: December 23, 2008
Location: Southern Illinois
Posts: 1,506
Bullet Traps

I know some people may not think that this thread belongs here, but I am going to be creating a bullet trap to catch all my cast bullets. With WWs getting harder and harder to find for some people, I think that a bullet trap would pay for itself very quickly. Some people shoot into a mound of dirt and then "mine" it out...but I am going to create a portable bullet trap. I have been doing some research on the net and have seen many great ideas. I plan on keeping mine simple, light, and portable. This mean mostly wood and a little steel. I have seen some designs that are simply a wooden box filled with rubber mulch (+ a steel plate along the back for those higher power loads that go all the way thru the mulch). These designs pretty much give you 100% of your lead back. I may give this a try and see how it works. Being wood, it should be easy to replace the effects of any errant shots. Anyone have any other ideas?
__________________
~~IllinoisCoyoteHunter~~

~NRA LIFE MEMBER~
~NRA CERTIFIED INSTRUCTOR~
IllinoisCoyoteHunter is offline  
Old August 21, 2009, 12:28 PM   #2
snuffy
Senior Member
 
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 2,797
There was an extensive discussion over on cast boolits site months back, but they just installed their own new server. Search function is down as well as archives. When they have full function back, we can do a search to find that thread.
__________________
The more people I meet, the more I love my dog

They're going to get their butts kicked over there this election. How come people can't spell and use words correctly?
snuffy is offline  
Old August 21, 2009, 03:24 PM   #3
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,932
when i was younger we had a barrel & filled it up past the 2/3 ring with dirt, then a peice of expanded metal for a grate to cook on , well as time went on & expanded metal disappeared or thrown away we took to shootin da barrel time passed & eventually the barrel had to be moved , i rolled the remainder of the dirt out & with it `bout 100lbs. lead .
the barrel was shot to peices near nuf but the bottom was holding the dirt there & what dirt washed away the lead stayed inside .
__________________
GP100man
GP100man is offline  
Old August 21, 2009, 04:47 PM   #4
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
I C H.... we have a trap for our bullets.... we shoot at 13yds... with .40, .38spcl, .357. and 9mm.... ours is not portable...two layers of 2X6s, two layers of 3/4" plywood(one in front to staple targets to,one in back) then we have a 1/8 thick steel plate that is 3" behind wood,,,,it works very well....all bullets are retreived,,,,just fyi...and as i said...not portable. ... just like the idea of saving the lead,,,and not having as much lead layin round on the whole hillside.
DiscoRacing is offline  
Old August 23, 2009, 08:02 AM   #5
hornady
Senior Member
 
Join Date: April 6, 2009
Location: SWPA
Posts: 428
I used sand bags and Rail road ties. Sand bags in front to slope the loose sand back to the ties. But I did see. A set up on wheels .it was all welded out of 3/8 steel plate. The opening. Was 3 foot by 3 foot. And tapered back to about 6 inches square . at the rear there was a 6 inch box and a piece angled down to drop the fired bullets on the ground. Nice looking out fit. He had a trailer hitch on it. And said he had used up to 44 Mag lead loads in it. He would just put a bucket under it, and most of the lead ended up in the bucket.
hornady is offline  
Old September 1, 2009, 12:12 AM   #6
jimkim
Senior Member
 
Join Date: July 3, 2008
Location: middle GA
Posts: 319
I think you could probably use a 55 gallon drum with a 3/8" steel plate welded on the base. Make a cradle to hold it and turn it on it's side. Put a piece of thin plywood on the front on which to affix your targets. Leave the bottom of the drum intact. The piece of 3/8" steel is just to reinforce the thin bottom. If the bottom is allowed to give a little when the bullet hits it, it will be less likely to ricochet.

You can also use an old tractor tire and a piece of 3/8"or 1/2" steel plate. Hang the plate in the tire so it swings freely. The bullet will hit the plate, shatter and fall in the tire.
__________________
Jan. 4, 2007 gasoline $2.10 gal....HMMM?

Last edited by jimkim; September 1, 2009 at 04:33 AM.
jimkim is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07226 seconds with 9 queries