Listing of Marlin 60/795 Aftermarket Stocks

Big Shrek · August 6, 2009, 07:43 AM

First we have stocks...there several MFR's known to me and a few used purveyors, but they're generally enough.

If anyone knows of a MFR that I've missed in the next posts, feel free to make a post below INCLUDING a LINK in the very least to their website...preferrably a Link and Picture of the product. Let's try to keep this "Sticky Worthy" and High in Solid Content. I also tried to list the Least Expensive price I could find for each item.

The Action of the Marlin 60 is basically the same as a Marlin 795...the differences start where the bullets load...clip mag or tube mag...so Bolt-On accessories are interchangeable for the OUTSIDE, but the stocks are Slightly different configurations.

Bear in mind that not all 60's are made alike, you have New style with LSHO, and old style without it. There are SLIGHT differences between the two, but nothing that can't be resolved with a little hand-fitting. Model 60/99/990

Same for the 70/795/995/7000...expect a little modification/pillar bedding to be required for a Perfect Fit.

New:
ATI Fiberforce stocks
http://www.gungarage.com/marlin_accessories.htm
For the 795, you cut out the magwell hole & fill in the magtube area with whatever you prefer. HAND FITTING REQUIRED.

BullpupGunStocks.com
http://www.bullpupgunstocks.com/
Model 60

Model 70 (have to remove material for LSHO for 795/995/7000)
http://www.bullpupgunstocks.com/grap.../marlin_70.gif

Butler Creek for model 70/995 (have to remove material for LSHO if used for 795)
http://www.cheaperthandirt.com/23943-1.html

Midway USA
Model 60 Grey Laminate, they do have other choices on their site
http://www.midwayusa.com/viewProduct...tNumber=954781

Model 795 Synthetic
http://www.midwayusa.com/viewProduct...tNumber=444233

NOS (New, Old Stock) & Used Stocks

Bob's Gun Shop http://www.gun-parts.com/marlinstocks/
ALL are MARLIN GUN STOCKS AND FORENDS , Bob's Gun Shop.Marlin Gun Stocks in Walnut and Synthetic Stocks. Marlin Semi Finish Gun Stocks, Marlin Rifle Forends, Marlin Lever Action Stocks and Froends, Marlin Antique Stocks and Forends, Marlin Synthetic

Numrich
http://www.e-gunparts.com/model.asp?idDept=158

I've been bugging the squish out of Richard's Microfit Gunstocks to get a specific line of THESE going...for the 795/60's...but I think it's going to take a lot more letters from a lot more people.
They can at present, be Special Ordered. But feel free to write 'em Richards Microfit Gunstocks
There are 9 million model 70/795's that would love an option of this nature.
http://rifle-stocks.com/silhouette.htm

However, since most 10/22 stocks, with some WECSOG bedding, would work for a 795, and with a lot more mods, would work for a Model 60. Judge for yourself if it is something you'd want to try to handle, but only the VERY experienced in Gunsmithing/stock fitting, IMHO, should even try.

That's the best of what I've found so far on Stocks

Oh, and don't forget Marlin.com for New Items...and a few oddball items that only the guys in Customer Service/Repair know about.

Hope this helps a few of y'all let folks know that there ARE accessories for Marlin 22's

joelberg · September 11, 2009, 02:38 AM

So you're saying that you think that bullpup stock would fit a 795?

Big Shrek · May 7, 2011, 04:03 PM

Joel, Yes it fits, use the stock marked Model 70, which is the Father of the 795.

Any stock made for the Marlin 60 can be modified for the 795 easily.
If you are handy with woodworking tools, even old M1 Garand Stocks

Or Flintlock stocks

jhgreasemonkey · May 7, 2011, 04:23 PM

I really like the looks of that grey laminate stock from midway. Doesn't houge make an overmolded stock for the marlin 60 yet? I put the OD green hogue stock on my 10/22 and love it. I wonder if they are going to make one for the marlin 60?

BaDgErFaN · August 29, 2011, 06:31 PM

Nice list of parts. Im thinking of picking up a marlin 60 and this thread may come in handy at some point.

Marlin Model 60 · November 25, 2011, 11:08 AM

Does Richards ever reply to emails?

Gehrhard · November 26, 2011, 09:34 AM

See (Google) NUTNFANCY video 795 review.

tim88 · November 30, 2011, 06:26 PM

hello , is possible to instal the dragunov ati stock on a marlin model 99c ? sorry for my english

wnycollector · November 30, 2011, 06:41 PM

After ~an hour of inletting I installed this stock on my Marlin 795 http://www.boydsgunstocks.com/Ross-R...-p/500-720.htm My 12 year old son has put ~5k rounds through "his" new 795.

megcole · December 27, 2011, 01:43 PM

http://www.boydsgunstocks.com/Replac...fles-s/124.htm

If any one is interested, I've found a variety of aftermarket stocks on Boyd's all pretty reasonable at about $100.00. They all seem to be laminate, but there are some unfinished as well.

pogden · January 30, 2012, 03:31 PM

I just put a Muzzelite Bullpup on my 1970's Model 60. It fit without any problem, very straight forward.

fordracer58 · March 9, 2012, 07:07 AM

Does anyone make a tactical stock for this gun marlin 983t is a bolt action 22mag. I would love to convert it to the AR stile tactical stock. Help please

August 6, 2009, 07:43 AM	#1
Big Shrek Senior Member Join Date: August 6, 2009 Location: NorthWest Florida Posts: 464	Listing of Marlin 60/795 Aftermarket Stocks First we have stocks...there several MFR's known to me and a few used purveyors, but they're generally enough. If anyone knows of a MFR that I've missed in the next posts, feel free to make a post below INCLUDING a LINK in the very least to their website...preferrably a Link and Picture of the product. Let's try to keep this "Sticky Worthy" and High in Solid Content. I also tried to list the Least Expensive price I could find for each item. The Action of the Marlin 60 is basically the same as a Marlin 795...the differences start where the bullets load...clip mag or tube mag...so Bolt-On accessories are interchangeable for the OUTSIDE, but the stocks are Slightly different configurations. Bear in mind that not all 60's are made alike, you have New style with LSHO, and old style without it. There are SLIGHT differences between the two, but nothing that can't be resolved with a little hand-fitting. Model 60/99/990 Same for the 70/795/995/7000...expect a little modification/pillar bedding to be required for a Perfect Fit. New: ATI Fiberforce stocks http://www.gungarage.com/marlin_accessories.htm For the 795, you cut out the magwell hole & fill in the magtube area with whatever you prefer. HAND FITTING REQUIRED. BullpupGunStocks.com http://www.bullpupgunstocks.com/ Model 60 Model 70 (have to remove material for LSHO for 795/995/7000) http://www.bullpupgunstocks.com/grap.../marlin_70.gif Butler Creek for model 70/995 (have to remove material for LSHO if used for 795) http://www.cheaperthandirt.com/23943-1.html Midway USA Model 60 Grey Laminate, they do have other choices on their site http://www.midwayusa.com/viewProduct...tNumber=954781 Model 795 Synthetic http://www.midwayusa.com/viewProduct...tNumber=444233 NOS (New, Old Stock) & Used Stocks Bob's Gun Shop http://www.gun-parts.com/marlinstocks/ ALL are MARLIN GUN STOCKS AND FORENDS , Bob's Gun Shop.Marlin Gun Stocks in Walnut and Synthetic Stocks. Marlin Semi Finish Gun Stocks, Marlin Rifle Forends, Marlin Lever Action Stocks and Froends, Marlin Antique Stocks and Forends, Marlin Synthetic Numrich http://www.e-gunparts.com/model.asp?idDept=158 I've been bugging the squish out of Richard's Microfit Gunstocks to get a specific line of THESE going...for the 795/60's...but I think it's going to take a lot more letters from a lot more people. They can at present, be Special Ordered. But feel free to write 'em Richards Microfit Gunstocks There are 9 million model 70/795's that would love an option of this nature. http://rifle-stocks.com/silhouette.htm However, since most 10/22 stocks, with some WECSOG bedding, would work for a 795, and with a lot more mods, would work for a Model 60. Judge for yourself if it is something you'd want to try to handle, but only the VERY experienced in Gunsmithing/stock fitting, IMHO, should even try. That's the best of what I've found so far on Stocks Oh, and don't forget Marlin.com for New Items...and a few oddball items that only the guys in Customer Service/Repair know about. Hope this helps a few of y'all let folks know that there ARE accessories for Marlin 22's

May 7, 2011, 04:03 PM	#3
Big Shrek Senior Member Join Date: August 6, 2009 Location: NorthWest Florida Posts: 464	Joel, Yes it fits, use the stock marked Model 70, which is the Father of the 795. Any stock made for the Marlin 60 can be modified for the 795 easily. If you are handy with woodworking tools, even old M1 Garand Stocks Or Flintlock stocks __________________ Marlin Specialist Calico Specialist A gun should be a tool in the hands of a deadly weapon, not a deadly weapon in the hands of a tool.

May 7, 2011, 04:23 PM	#4
jhgreasemonkey Senior Member Join Date: February 7, 2006 Location: 46.199ºN 122.188ºW by way of Tacoma Wa Posts: 2,235	I really like the looks of that grey laminate stock from midway. Doesn't houge make an overmolded stock for the marlin 60 yet? I put the OD green hogue stock on my 10/22 and love it. I wonder if they are going to make one for the marlin 60? __________________ S&W 5906 9mm, FN commercial Mauser .270 win, Winchester 94 .30-30, Ruger Redhawk .44 mag, Ruger 10/22 .22lr, Ruger P-95 9mm, Savage 110 .30-06, Marlin 983 .22wmr I support our constitutional right to arm bears.

November 30, 2011, 06:26 PM	#8
tim88 Junior Member Join Date: November 30, 2011 Posts: 1	dragunov stock marlin hello , is possible to instal the dragunov ati stock on a marlin model 99c ? sorry for my english

December 27, 2011, 01:43 PM	#10
megcole Junior Member Join Date: November 18, 2011 Posts: 2	marlin 795 stock http://www.boydsgunstocks.com/Replac...fles-s/124.htm If any one is interested, I've found a variety of aftermarket stocks on Boyd's all pretty reasonable at about $100.00. They all seem to be laminate, but there are some unfinished as well.

September 11, 2009, 02:38 AM	#2
joelberg Member Join Date: April 14, 2009 Posts: 41	So you're saying that you think that bullpup stock would fit a 795?

August 29, 2011, 06:31 PM	#5
BaDgErFaN Member Join Date: December 28, 2008 Location: Southern Wisconsin Posts: 40	Nice list of parts. Im thinking of picking up a marlin 60 and this thread may come in handy at some point.

November 25, 2011, 11:08 AM	#6
Marlin Model 60 Junior Member Join Date: November 25, 2011 Posts: 1	Does Richards ever reply to emails?

November 26, 2011, 09:34 AM	#7
Gehrhard Junior member Join Date: July 15, 2009 Location: East of the Missississippippi Posts: 675	See (Google) NUTNFANCY video 795 review.

November 30, 2011, 06:41 PM	#9
wnycollector Senior Member Join Date: April 22, 2007 Posts: 1,739	After ~an hour of inletting I installed this stock on my Marlin 795 http://www.boydsgunstocks.com/Ross-R...-p/500-720.htm My 12 year old son has put ~5k rounds through "his" new 795.

January 30, 2012, 03:31 PM	#11
pogden Junior Member Join Date: January 30, 2012 Posts: 1	I just put a Muzzelite Bullpup on my 1970's Model 60. It fit without any problem, very straight forward.

March 9, 2012, 07:07 AM	#12
fordracer58 Junior Member Join Date: March 9, 2012 Posts: 1	Marlin 983T Does anyone make a tactical stock for this gun marlin 983t is a bolt action 22mag. I would love to convert it to the AR stile tactical stock. Help please