The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old June 22, 2009, 01:40 AM   #1
gokyo
Member
 
Join Date: September 25, 2008
Posts: 43
Wadding in my 1860

I am sure by now some of you are getting tired of the NOOB asking questions but there is more.

I have read the sticky on Cap and ball revolvers many times.

In it using a wool felt wad is suggested. It is also suggested to buy a felt cutter from Buffalo arms.

I went to there sight and found the cutter I then went o buy some wadding.

However they had many types.

Cork,
Synthetic
Plant material

However they did not have wool.

So if I am going to buy a sheet of fabric which kind, works best. Also how do you lube these other materials.

I little help would be much apperciated.

I get my pistols next tuesday and I want to be ready to go shooting right away.
gokyo is offline  
Old June 22, 2009, 01:42 AM   #2
gokyo
Member
 
Join Date: September 25, 2008
Posts: 43
I also have a rifle so if it was possible to use only one powder that would be great

Last edited by gokyo; June 22, 2009 at 01:51 AM.
gokyo is offline  
Old June 22, 2009, 01:51 AM   #3
Smokin_Gun
Senior Member
 
Join Date: December 4, 2005
Location: Mojave Desert, CA
Posts: 1,195
Quote:
A lot of people seem to think that Black powder is the only way to go.

I am one who has been of that opinion for about 30 years and still recommend Black Powder fffg for under .50 cal ffg for .50 cal and over...
But you can buy either here... I buy 10/lb lots mix and match at a good price...shipping and hazmat included.
BP is more accurate less corrosive and cheaper than Pyrodex...also eazier to clean up...in my opinion.

http://powderinc.com/

Welcome to the Forum and BP shootin'
__________________
"I Smoke Black Powder" "Favor an 1858 Remington"
SGT. Smokin' Gun, Mosby's Rangers 43rd Virginia Cavalry C.S.A.
SASS# 19634, ...
Admin:http://blackpowdersmoke.com/oldcoots/index.php
Smokin_Gun is offline  
Old June 22, 2009, 07:11 AM   #4
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
You'll find that powder is a personal choice and there are some strong opinions on what to use. Try them all and use what works best for you. Do a search on 'grease cookies', you can make these at home, they well replace the wads and eliminate the need to grease the end of the chambers. They seal the chamber, keep things lubed and fouling soft. They are great for lubing the arbor too.
madcratebuilder is offline  
Old June 22, 2009, 10:45 AM   #5
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,851
gokyo - Buffalo Arms also has precut wool felt wads, either dry or prelubed. Cost point for each is reasonable - 1000 dry wads for $20.00 & you can use your own lube.

There is also BPstuffllc.com - He has lubed felt wads for $6.00/200.

I prefer fffg in my revolvers & ffg in my .54 cal rifle; but either ffg or fffg would work just fine in both.

FM
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old June 22, 2009, 11:10 AM   #6
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,719
You can probably go to a thrift store and get an old felt hat pretty cheap. They make good wads and there's a bunch of them in a hat for a buck or two. I answered the powder question on the other thread.
Hawg is offline  
Old June 22, 2009, 02:31 PM   #7
mykeal
Senior Member
 
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,759
Story break - my neighbor bought an old felt cowboy hat at the local thrift store for $1.00 a week ago. Went home and banged out a couple dozen wads, lubed 'em up and headed to the range to try them. Worked just fine. When he got home he couldn't find the hat - while he was gone the wife found the hat, all cut up and ragged, and cut up the remains for her sewing basket.

Gotta keep them valuables locked up.
mykeal is offline  
Old June 22, 2009, 05:25 PM   #8
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
An outfit going by the name of Durofelt is the "official" supplier to all American muzzle loader and C&B shooters. They negotiated and won the big national felt contract, and control all of the nation's dense wool felt production and sheep too.
As a matter of fact, it's considered to be illegal to buy dense wool felt from anyone else but them.
So just buy theirs and try to stay out of the slammer!

http://www.durofelt.com./image_26.html

http://www.durofelt.com./

Last edited by arcticap; June 22, 2009 at 05:44 PM.
arcticap is offline  
Old June 24, 2009, 04:17 AM   #9
SamStafford
Junior member
 
Join Date: May 16, 2009
Location: Portageville, MO. 63873
Posts: 162
Hmmmm...Think I will get some of that Durofelt and try it out.
SamStafford is offline  
Old June 26, 2009, 01:53 PM   #10
Noz
Senior Member
 
Join Date: February 25, 2009
Posts: 643
For a 44 cap and ball pistol, go to harbor freight and buy the metric set of hollow punches(about $6). The 11mm punch makes great wads with the Durofelt. Soak them in the lube of choice(I like a harder lube for the wads than most folk) and you are good to go. I made enough wads for a years worth of shooting for less than $20 in the felt.
Noz is offline  
Old June 26, 2009, 02:20 PM   #11
gokyo
Member
 
Join Date: September 25, 2008
Posts: 43
Great suggestion on the punch set thank you.
gokyo is offline  
Old June 26, 2009, 03:31 PM   #12
SamStafford
Junior member
 
Join Date: May 16, 2009
Location: Portageville, MO. 63873
Posts: 162
Thanks, I'll get that 11mm punch.
SamStafford is offline  
Old June 26, 2009, 05:45 PM   #13
long rider
Senior Member
 
Join Date: January 8, 2008
Posts: 669
Punch set what fer? you wanna make wads for a 44
well do what i do use a 45 colt case, bin useing them
for years.
__________________
Sod Buster Tried To Pull On Willson.
long rider is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08688 seconds with 7 queries