The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old June 3, 2009, 09:02 PM   #1
BigDinOC
Member
 
Join Date: February 17, 2008
Location: Southern California
Posts: 89
Which brand 1911 ?

I am sure this question has been already asked in some way, shape or form in the past. So forgive me if this is the case. I am looking for a 1911 (preferably Made in America) for beginning Bullseye shooting and possibly some IDPA down the road? Which brand is most accurate out of the box and has good customer service. I want something that would be worth upgrading components as my skill level hopefully increases or accurizing at a later date. NIB price range $900-$1500.

Thanks in advance all.
BigDinOC is offline  
Old June 3, 2009, 09:22 PM   #2
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,550
1. Old school Colt 70 series and have it worked on by a reputable smith.
2. Springfield TRP

Either one, you won't be disappointed. There's been some traffic lately on a TRP or two that's been well under your budget...
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Old June 3, 2009, 09:40 PM   #3
rduckwor
Senior Member
 
Join Date: June 26, 2008
Location: L.A. - Lower Alabama
Posts: 358
Try to find a Dan Wesson Valor. Adjustable tritium night sights and possibly the very best production 1911 in the world today. They make 200 a year, so look hard.

Good Luck,

RMD
__________________
RMD
rduckwor is offline  
Old June 3, 2009, 10:03 PM   #4
Ken O
Senior Member
 
Join Date: November 2, 2005
Location: Half way between Grayling and Cadillac, Michigan
Posts: 353
For IDPA and IPSC just about any 1911 will work. But, you threw in the Bulleye. If you want good groups at 50 yards, your going to have to have some smithing done. The Springfield is a 70 series, and would probably be the least expensive way to go. It would be good out of the box for IPSC and IDPA, but would need some tighting for Bulleye.
Ken O is offline  
Old June 3, 2009, 10:19 PM   #5
Casimer
Senior Member
 
Join Date: April 23, 2007
Location: Pennsylvania, USA
Posts: 1,913
For BE I'd look for a used match 1911. These are typically a less expensive than a new pistol + the necessary accurizing, and it's easy to find one that's American made.

Check-out the Bullseye-L email list. You'll see sales of second hand pistol pretty frequently - or you could post an inquiry describing what it is you're looking for.
Casimer is offline  
Old June 4, 2009, 08:53 AM   #6
melchloboo2
Member
 
Join Date: January 2, 2009
Posts: 37
One pistol for both disciplines might be OK to get started. But I think you will find that each discipline has different demands for a competitive 1911, some of which contradict each other. If you get serious about both, you'll probably want two differently tuned guns.
melchloboo2 is offline  
Old June 4, 2009, 09:21 AM   #7
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,008
A beginning bullseye gun should be the .22.

Any reliable 1911 will do for IDPA CDP.
Jim Watson is offline  
Old June 4, 2009, 07:47 PM   #8
BigDinOC
Member
 
Join Date: February 17, 2008
Location: Southern California
Posts: 89
I already have the 22 area covered with a couple of MK's. I am looking for the next step.
BigDinOC is offline  
Old June 5, 2009, 07:31 PM   #9
40cal_joe
Junior Member
 
Join Date: June 26, 2008
Posts: 3
I stated in Bullseye about 1 year ago the gun I got started with and currently use is a Springfield model PI9132LP Loaded Target model. This gun is sweet! I picked mine up used for $750. They are available new on Guns America for less than $1000. With the Matchdot and trigger work I have less than $1000 in mine. I shoot expert scores both indoor and outdoor.

Good luck and welcome to the sport!
40cal_joe is offline  
Old June 6, 2009, 10:50 AM   #10
oldcspsarge
Senior Member
 
Join Date: January 11, 2008
Location: Rocky Mountains
Posts: 441
I would keep an eye out for a clean, used Les Baer Premier 2 for the type of shooting you are describing and quality you are seeking.

They pop up on www.gunbroker.com or www.gunsamerica.com

or Call John @ proload distributors and talk with him about a Baer.

www.proload.com He is the Internet Distributor of Baer Firearms
oldcspsarge is offline  
Old June 20, 2009, 08:22 PM   #11
BigDinOC
Member
 
Join Date: February 17, 2008
Location: Southern California
Posts: 89
I found a Colt Gold Cup and a Springfield Loaded. Anyone have any pros or cons on either.

Thanks.
BigDinOC is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08051 seconds with 7 queries