The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old May 21, 2009, 06:59 PM   #1
EmptyHull
Senior Member
 
Join Date: March 29, 2009
Posts: 145
Six Shooter question

I am looking at the 1873 Cattleman Uberti line and Heritage line of SAA pistols. I would like to know whats the difference between the different models in the Uberti lineup? There is a matt blue finish, steel finish and a brass on the Matt blue. Also, what is the difference between the Cattleman Hombre, CHISHOLM and the GUNFIGHTER models? Tim
EmptyHull is offline  
Old May 22, 2009, 04:17 PM   #2
EmptyHull
Senior Member
 
Join Date: March 29, 2009
Posts: 145
I found the Uberti for below MSRP, 1873 Hombre model 5.5 " barrel. Question is do I go 45 or the 38/357 route? Tim
EmptyHull is offline  
Old May 23, 2009, 08:11 AM   #3
champ198
Senior Member
 
Join Date: June 30, 2008
Posts: 217
when i started CAS shooting i shot 45 colts....they are much higher money wise to shoot than 38/357 even if you reload them.....thats why this time i went with 38/357s.....much much cheaper to load
champ198 is offline  
Old May 23, 2009, 09:21 PM   #4
Wobble
Senior Member
 
Join Date: April 20, 2009
Location: Georgia USA
Posts: 163
I have a Cattleman Chisholm .45 Colt, 5.5" barrel, completely matte blue and checkered handles, which I just shot on the range for the first time today. It feels good and shoots very well. I'm very pleased with it.

Last time I counted, Uberti has about 58 variations of the Cattleman with different combinations of frame finish, backstrap and trigger guard finish, handles, barrel length, caliber, and new/old model. Some specific combinations have names such as Hombre, Cody, Desperado, Gunfighter, and Frisco. Other combinations don't have special names. Go to the Uberti web site for a complete breakdown of variations and models.
Wobble is offline  
Old May 26, 2009, 03:31 PM   #5
Mark Milton
Junior member
 
Join Date: January 30, 2006
Posts: 504
A local gunshop used to carry the AWA heritage guns. I never fired one but they certainly looked and felt nice....

I am fond of the Cattleman though and you can get it pretty much any way you want it, depending on the importer.

Want an authentic one, right down to the last detail? Check out the Cimarron and Uberti USA line up. Want one with a transfer bar safety? Dig on the Stampede, imported by Beretta.

Want a stainless Peacemaker? Uberti can deliver. Want a blackpowder cap and ball peacemaker? Uberti can deliver.
Other than cosmetic differences the various guns are pretty much mechanicaly identical.
The biggest difference is the "Millenium" models, which, I have read somewhere, have coil springs instead of traditional flat mainsprings, which is somewhat of an improvement. Those are the ones with the matte bue finish and brass grip frames.
Probably the most uncommon Uberti guns are the Buckhorn, which is a big Blackhawk-esque .44 magnum and the Uberti Tornado which is a beautiful gigantic .454 single action.
I have never seen or handled a Tornado, by the way, only seen pics.
Mark Milton is offline  
Old May 29, 2009, 09:03 PM   #6
EmptyHull
Senior Member
 
Join Date: March 29, 2009
Posts: 145
Thanks for the info. Been on vacation and out of touch so thats why the delay. I used to reload 38's about 30 years ago and to go with the 357/38 over 45 is good advice. I am thinkling the case hardened model would be nice as Fathers day is right around the corner! Tim
EmptyHull is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06506 seconds with 7 queries