The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Lock and Load: Live Fire Exercises

Reply
 
Thread Tools
Old May 4, 2009, 10:15 AM   #1
Luciano
Senior Member
 
Join Date: March 22, 2006
Posts: 111
Gym plates as steel targets?

Has anyone ever used round gym plates for the 1" inch bar with the hole as a metal target? Some are very flat and thick.
Luciano is offline  
Old May 4, 2009, 11:24 AM   #2
Ed K
Member
 
Join Date: November 7, 2008
Posts: 86
gym plates are generally cast iron not cold rolled or stamped steel and would tend to break similar to shooting clay bird with bullet. Maybe hazardous to your health
Ed K is offline  
Old May 4, 2009, 12:53 PM   #3
Navy joe
Senior Member
 
Join Date: January 28, 2001
Location: VA, USA
Posts: 1,803
Buy AR400 or AR500 plates from someone who makes plates as a living. Your safety and the health of the shooting industry will be enhanced. Everyone has got a plan for junk steel, but the fact is if the steel is not flat, if it dimples, craters, or holes when you shoot it then stuff will be coming back towards the firing point. Use proper steel at safe distances that is rated for your caliber.
__________________
FY47012
Navy joe is offline  
Old May 9, 2009, 11:59 PM   #4
shooter_john
Senior Member
 
Join Date: December 11, 2002
Location: ALABAMA
Posts: 1,472
I haven't shot weights, but I have shot some manhole covers, which are also cast iron. 223's leave a pretty good scar, and 308ish stuff makes it swiss cheese for 5-10 rounds, then it falls to pieces. I would waste my time (or weights) fooling with it.
shooter_john is offline  
Old May 10, 2009, 09:34 AM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,045
What Navy Joe says. Plates do dimple and then they'll cause bullets to richochet back. I've had that happen to me before and there's that famous video on Youtube of the fellow whose bullet came back, hit the ground (thankfully dissipating some more energy) before striking the shooter.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old May 10, 2009, 10:27 AM   #6
Dingoboyx
Senior Member
 
Join Date: March 7, 2009
Location: South East Queensland, Australia
Posts: 1,513
Weights are generally cast iron

No quality control to speak of.... I agree with the others who said they will just break (especially if you hit an edge or thereabouts) Sort of like shooting an engine block.... Rather than weights, probably old flywheels out of stickshift cars would last alot longer (if they are steel rather than cast, but just cutting some circles in 12mm steel would be cheaper in the long run, might cost a bit more to make, but would last 10 x longer.

A caution with shooting steel tho, whatever you mount it on, have it hang loose or fixed with a downward angle, so ricochet's hit the ground, rather than come straight back at you, and definately don't angle them upward
Our rules in Oz are not to shoot steel targets from within 10 meters (for obvious reason of ricochets (getting your bullet back)
__________________
Muzza
If you cant blind them with brilliance, Baffle them with BS
Be alert...... there is a shortage of LERTs
Dingoboyx is offline  
Old May 14, 2009, 10:11 PM   #7
mhburton
Junior Member
 
Join Date: March 23, 2005
Location: Texas Hill Country
Posts: 10
What thickness? AR400

How thick should the AR 400 be for different calibers? Discount Steel in Ft. Worth sells it in smaller pieces online. I have been wanting to build some targets, but was never sure what steel specifically to use.

I want to build some smaller spinner type targets for 22LR, 22 Mag and some larger ones for .308, 30-06 as well as 9mm & .45. I would imagine the thickness required for '06-.308 would be good for all the other caliber rounds although thinner plate for shooting with 22LR would be a lot cheaper. I thought Ammo was high, Jeez!
mhburton is offline  
Old May 15, 2009, 09:55 PM   #8
jaysouth
Senior Member
 
Join Date: February 27, 2001
Location: Richmond, VA
Posts: 586
If you limit your shooting to pistols, the iron tie plates from railroads make very nice reactive targets. They are about 9X12 inches and can be found laying on the side of railroad tracks if one looks.
jaysouth is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07340 seconds with 7 queries