|
April 30, 2009, 05:55 PM
|
#1 |
|
Junior Member
Join Date: April 30, 2009
Posts: 2
|
Kobra Scope Repair
I've got a Kobra red-dot scope with a broken reticle selector switch. Any repair places out there? Just need a microswitch. The outside button is OK. Everything else works and I can still select any of the 4 reticles using the on/off switch. Anyone maybe got a "dead" Kobra that I could rob a switch out of?
I might be able to repair the microswitch if someone can tell me how to remove it. Seems like it comes out from the right side with the switchplate removed. There are 4 identical microswitches behind the switchplate. Are they soldered in to a PC board?, hardwired?. I'm nervous about removing the bottom cover. Is the scope nitrogen filled? |
|
|
May 14, 2009, 01:52 PM
|
#2 |
|
Junior Member
Join Date: April 30, 2009
Posts: 2
|
Found Broken Kobra Scope
I have located a broken Kobra scope and do not need another. If I can figure out how to transplant a switch, I may have success. Anybody been deep inside a Russian Kobra red-dot scope? Is it booby-trapped?
|
|
|
|
July 2, 2012, 01:21 PM
|
#3 |
|
Junior Member
Join Date: July 2, 2012
Posts: 1
|
Well, I'm here three years later with exactly the same issue with the same switch . . .
Did you ever figure out how to repair your Kobra? Larry |
|
|
|
July 3, 2012, 02:56 AM
|
#4 |
|
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 3,625
|
kalinka
Have you tried talking to the Kalinka Optics people and see if they could effect a repair?
My only guess. |
|
|
 |
| Thread Tools | |
|
|
