The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old May 10, 2009, 11:02 AM   #1
1enforcer
Member
 
Join Date: November 8, 2005
Location: Fort Atkinson, WI.
Posts: 20
Building an AR-15 for competition, whats the best barrel to go with?

I'm getting into competition shooting. I'm in the process of building my own AR-15 in .223. I will be shooting up to 400 yards. Which size barrel would be the best; 14, 16, 18, 20, 22 or 24 inch? Also, get a heavy or light barrel? Any recommened scopes? Anyone who can help, please do so.
1enforcer is offline  
Old May 10, 2009, 03:06 PM   #2
Casimer
Senior Member
 
Join Date: April 23, 2007
Location: Pennsylvania, USA
Posts: 1,913
What types of competition do you want to participate in?

Both the Wilson and Douglas match barrels have good reputations for quality and accuracy at a reasonable price. Kriegers are more expensive, but are renown for their durability - so they're often a good value for high-volume shooters.

20" is typical for precision shooting at longer ranges, but you might want something shorter for action oriented disciplines.
Casimer is offline  
Old May 10, 2009, 04:12 PM   #3
1enforcer
Member
 
Join Date: November 8, 2005
Location: Fort Atkinson, WI.
Posts: 20
thanks for your in put.
1enforcer is offline  
Old May 10, 2009, 05:56 PM   #4
zoomie
Senior Member
 
Join Date: January 23, 2006
Location: WY
Posts: 1,750
Look at White Oak. They advertise themselves as a match rifle builder, with tactical/hunting on the side.

http://www.whiteoakprecision.com/index.htm
http://www.whiteoakarmament.com/

I've got one of their 6.8 barrels and I've been very pleased.
zoomie is offline  
Old May 10, 2009, 06:14 PM   #5
ltdave
Senior Member
 
Join Date: September 16, 2005
Posts: 226
will you be shooting primarily at 400yds or greater?

do you plan on shooting 'service rifle' style competition?

if so, 20", 1:7 or at least a 1:8 twist rate...

Wilson from WOA/WOP with proper front sight base (FSB) will set you back about $250. they are stainless...

you can go with a Douglas; you will get very similar results for about the same money...

if you go Krieger you will be able to say youve got a Krieger barrel and to be honest you probably wont be able to tell the difference in accuarcy. you MAY be able to detect a difference in longevity. barrel life depends on many variables so you cant make a blanket judgment that a K-brand barrel will automatically last longer than another...

if youre using it for run-and-gun competition, you can save some valuable weight by going with a Chrome-Moly barrel vs stainless. with very similar life span...

in MY experience CM barrels start losing accuracy from round one and gradually decreases to the point its noticeable beyond 300-400 yds. stainless will hold its accuracy up to a point at which it will just stop shooting well at the longer distances. think of them as alkaline batteries vs lithium...

give us a bit more information on what your intentions are...
ltdave is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08296 seconds with 9 queries