The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old April 25, 2009, 07:11 PM   #1
camoman33935
Junior Member
 
Join Date: January 26, 2009
Posts: 8
.243 Silencer??

Can anybody tell me who makes a silencer for a .243?
camoman33935 is offline  
Old April 25, 2009, 08:09 PM   #2
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,212
.243 can not be effectively supressed. It is a supersonic round.
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old April 25, 2009, 08:17 PM   #3
zoomie
Senior Member
 
Join Date: January 23, 2006
Location: WY
Posts: 1,754
Most centerfire rifle ammo is supersonic, considering Mach is only ~1100 ft/s at sea level. That doesn't mean you can't suppress the caliber.

If you load full speed ammo, it'll be quieter than unsuppressed, but you'll still have the Mach crack. You can also download heavyweight bullets in the subsonic range.

Any .308 suppressor will work for you with .243, provided you have the right muzzle threads. A specialty .243 suppressor would work better, but 6.8 guys are using .308 cans on their 6.8/.277 barrels with good results.
zoomie is offline  
Old April 25, 2009, 08:22 PM   #4
camoman33935
Junior Member
 
Join Date: January 26, 2009
Posts: 8
i realize that the .243 is supersonic......

i just wanna do it to take some of the boom off.....ya know what i mean.....

Last edited by camoman33935; April 25, 2009 at 08:33 PM.
camoman33935 is offline  
Old April 25, 2009, 08:48 PM   #5
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
People who say again and again that you can't effectively silence a supersonic caliber need to shut up. Seriously.

Video link - 30-06 with/without silencer
PTK is offline  
Old April 25, 2009, 09:27 PM   #6
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,212
Seriously, you need to learn some manners!
Certainly, you can lower the sound level, but not to nearly the point of a subsonic round-hence "you can not effectively supress a supersonic caliber."
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old April 25, 2009, 09:43 PM   #7
camoman33935
Junior Member
 
Join Date: January 26, 2009
Posts: 8
thanks for the vid PTK....

and can we please get this thread back to the original question?
camoman33935 is offline  
Old April 25, 2009, 09:49 PM   #8
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
Quote:
People who say again and again that you can't effectively silence a supersonic caliber need to shut up. Seriously.
Agreed, that's like saying pistol grip guns are for "spraying from the hip". 100% wrong and instantly exposes the individual as someone who does not know what they are talking about.

Of course supersonic rounds can be effectively suppressed. Compared to the muzzle blast, the sonic crack is not very loud at all. It is also difficult for people, or animals, to determine a direction a shot came from from the sonic crack. They only hear it as the bullet passes and the crack also reflects off nearby objects.

The crack instantly tells an animal that something is up, but without the muzzle report, it can't tell where the shot came from.

Now, for a .243 suppressor. I am not aware of any manufacturers that make a .243 suppressor. A friend has a YHM Phantom 7.62 that he has mounted on his AR-15 in 5.56. I was surprised how well it suppressed despite being a .308 can. Not as quiet as my TAC-16, but certainly hearing safe. (Though it might be because he was shooting an AR-15 and my TAC-16 is on a T/C Encore.

Video is a very poor way to gauge suppressor performance as the mic clips the sound. The best way to gauge a suppressors performance is in person. Here is my friend with his Phantom 7.62. He is wearing muffs when he shoots it suppressed, but I was with him a few weeks ago when he was shooting it and it was hearing safe for the operator, a bit louder to the side of him, but still a vast improvement over unsuppressed.

YHM Phantom 7.62 QD & YHM Cobra M2 9mm

The reality is that there isn't a demand for a dedicated .243 suppressor. From what I have read, most people just use a .308 suppressor and get good performance.

So you could either contact a manufacturer and have a custom job built or just get a .308 suppressor.

The manufacturers I would recommend are Advanced Armament Corp and Yankee Hill Machine. Though there are others.

Silencer Research has some very good info, but some of the review require you to pay to see. Not unexpected, paying for suppressors and the NFA tax is expensive. http://www.silencerresearch.com/

I like the Silencer Talk forum as well. http://www.silencertalk.com Robert Silvers does work for AAC, but they welcome discussion on other suppressors manufacturers and are much more open than other forums. (You really have to work at it to get banned there.) Try a little of everywhere and don't just rely on one source.

Whatever you do, don't go to AR-15.com for suppressor advice. The mods here frown on "bashing" other forums here so I won't go into details and leave it at that.

Edit:

Quote:
Seriously, you need to learn some manners!
Certainly, you can lower the sound level, but not to nearly the point of a subsonic round-hence "you can not effectively supress a supersonic caliber."
No, you need to learn what you are talking about.

Muzzle noise and bullet noise are two completely different things. Quit treating them as one problem. Suppressors only deal with the muzzle report. Subsonic or supersonic, it does not matter. They can both be effectively suppressed. (Being safe to use without hearing protection, under 140 dB.) Yes a combination of subsonic/suppressed will be quieter overall. That is not the question that is being asked.

Saying a supersonic round cannot be effectively suppressed is like saying that a gun with a pistol grip is made to be sprayed from the hip. Factually and intellectually dishonest.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.

Last edited by Crosshair; April 25, 2009 at 10:00 PM. Reason: Responce
Crosshair is offline  
Old April 25, 2009, 09:58 PM   #9
camoman33935
Junior Member
 
Join Date: January 26, 2009
Posts: 8
thanks for the info Crosshair
camoman33935 is offline  
Old April 26, 2009, 12:42 AM   #10
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
Those who suggest supersonic rounds can not be effectivly silenced have done too much reading and listening to people at gun shows, and not enough shooting. It is well worth the effort.

From other posts I see you are not 21 yet, so your only option would be to buy one from an individual, which means a $400 tax hit, or to build one yourself.


30 cal would be the std. production item, smaller manuf. would do a custom .243 but 30cal would handle all your calibers smaller.
David Hineline is offline  
Old April 26, 2009, 12:51 PM   #11
RAnb
Junior member
 
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
Excellent post Crosshair. The only thing I can add is that while a rifle, say the AR-15, can be suppressed well enough to avoid using ear plugs, shooting in an enclosed area or under weather protection can increase the suppressed noise level enough to damage hearing.

I tried making a video to demostrate the difference between suppressed and unsuppressed gunfire, but is was a complete failure. What played back on the TV or computer showed hardly any difference, probably due to the cheap microphone failing to record the peak impulse of the unsuppressed gunfire.

For anyone with access to a lathe, I recommend making their own silencers. While you may need to make them a bit bulkier to compare in suppresssion to the pros, it is a rewarding experience and can result in saving money if you make several. The ATF will approve a form 1 as long as you are 18 and live in a state where they are legal.

Ranb
RAnb is offline  
Old April 26, 2009, 04:45 PM   #12
1SGT Harlin
Member
 
Join Date: July 4, 2007
Posts: 21
Build One

Dont break the law. When I was in South Africa last year I shot a 6mm/303 enfeild that had a homemade can. I had brought a laser and night scope with me . I was a on a springbuck cull hunt and shot 12 of them one after the other.
There easy to make. The one I use made a fair amount of noise but, the critters didnt know where the shot came form.
1SGT Harlin is offline  
Old May 7, 2009, 05:08 AM   #13
Billyb
Junior Member
 
Join Date: May 7, 2009
Posts: 2
.243 Sound moderator

Hi there.

Just joined this forum and posting for the first time.

I came accross this thread whilst looking for info on subsonic .243 reloading data.

Sound moderators here in the UK are sold along generic caliber lines i.e. .22, .25, .30 etc.
I have 2 Ase Utra (http://aseutra.fi/english/index.html) moderators, one in .25 and .30. Up until recently I only the .30 and
used that on my .308 as well as my .243. My mark 1 ear could not tell the difference in sound moderation, although
my guess is that using instruments you would find that it would be louder in a .243 as more gas would probably escape with
the smaller calibre bullet and bigger mod muzzle diameter.
The only reason I bought the .25 mod was because I acquired a 2nd hand custom 6x47 lapua Remy700where the muzzle thread was
different to my .30 mod.


I have very effectively loaded subsonic .308 using 150gr and 180gr cast bullets and fast burning pistol
powders such as red dot and bullseye. They are very accurate in the 50-70yd range (less than 1 inch).
At 100 yds they open up to 2-3 inches with some flyers out to 6inches - still haven't got to the bottom of
why accuracy drops off so quickly, particularly as the bullet is still stable at 100 yds.
The sound moderation is excellent - all you can hear is 'wooshing' sound accompanied with a tinny vibration
from the moderator. It is possible to see the bullet in flight through the scope and here the 'thwack' as it strikes the target.

With supersonic loads, moderators are extremely effective at reducing muzzle report and as has already been pointed out the
ballistic crack is considerably quieter than the sound of the muzzle report.
Another significant benefit is that moderators significantly reduce felt recoil - particularly true on my .308.

I recently tried loading subsonic for the .243. This was not very sucessful and I ended up with a round (jacketed) stuck in the barrel.
This was removed at the cost of a cleaning rod (handle smashed) and a 5mm brass punch (end sawn off).
Clearly there are safety issues! However, I would say that it was very obvious that the round was stuck - there was no recoil or sound.
I am going to persevere with the .243, but with cast bullets this time.
Billyb is offline  
Old May 7, 2009, 02:04 PM   #14
Bartholomew Roberts
Senior Member
 
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 5,719
Quote:
I like the Silencer Talk forum as well. http://www.silencertalk.com Robert Silvers does work for AAC, but they welcome discussion on other suppressors manufacturers and are much more open than other forums. (You really have to work at it to get banned there.)
AAC sued a poster over at AR15.com for disparaging their suppressors, so while you might have to work at getting banned, it looks like they are quite willing to drop lawyers on people. Considering how rare that happens despite some of the outrageous slander on the Internet, I think it says a lot about AAC.
Bartholomew Roberts is offline  
Old May 7, 2009, 06:00 PM   #15
Yellowfin
Senior Member
 
Join Date: January 7, 2007
Location: West Upstate NY
Posts: 2,303
AAC's market is small, so it makes them vastly more sensitive to slandering of their business than many others. Having virtually no resale market, very little to no mainstream firearms community exposure and in-store advertising, and horrid regulatory impediment on their market makes it even worse, so suffice it to say I understand their position.

What Gemtech did in suing AAC and getting the ATF to impose what is referred to as the "GemTax" is much, much worse.
__________________
Students for Concealed Carry on Campus http://www.concealedcampus.org
New York gun owners unite! Join now! http://www.nyshooters.net
May Issue is the new Separate but Equal.
Yellowfin is offline  
Old May 7, 2009, 06:20 PM   #16
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
Quote:
AAC sued a poster over at AR15.com for disparaging their suppressors, so while you might have to work at getting banned, it looks like they are quite willing to drop lawyers on people. Considering how rare that happens despite some of the outrageous slander on the Internet, I think it says a lot about AAC.
I read up on both sides of the case That lawsuit was for libel against AAC. That poster made statements about AAC and their business/government contracts and said they were factual. They had been doing so repeatedly over a long period of time. I would have sued them too. People have been successfully sued for libel for much lesser statements. If you keep poking a bull in the butt eventually it is going to turn around and stomp you into the ground.

It is one thing to say your opinion about a product. It is another things to repeat a rumor about a product. It is another to say things and repeatedly say that they are 100% factual. This lawsuit is essentially telling that poster to "put up or shut up." AAC says the statement that person made are false, if they are, then that person is in world a world of hurt. "Statements made in a good faith and reasonable belief that they were true", are generally protected, reading through everything one sees that the poster probably won't be protected.

Either way, the poster brought it up upon themselves for making statements, claiming they were fact, and not backing them up.

"The can sounded like it was made of plumbing parts when I shot it." is not libel.
"I think the can is made out of plumbing parts." is not libel.
"I have a source that tells me that their cans are made of plumbing parts." is libel, as you are asserting that your statement is factual and not just an opinion. Doing this once, you would probably be able to get away with it by claiming that statement was "made in a good faith and reasonable belief that they were true". Doing it multiple times over a long period of time, continually asserting that it is factual, and you are going to get sued.

In cases like this, the burden of proof generally lies on the plaintiff to prove injury.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Old May 7, 2009, 06:59 PM   #17
Bartholomew Roberts
Senior Member
 
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 5,719
Quote:
Originally Posted by Yellowfin
What Gemtech did in suing AAC and getting the ATF to impose what is referred to as the "GemTax" is much, much worse.
What are you talking about? I don't follow Internet drama all that closely; but my understanding is that the "GemTax" refers to Gemtech sending the ATF a letter asking whether they can repair a suppressor where the outer tube has been damaged without "manufacturing" a new suppressor and requiring another $200 transfer tax.

ATF answered "No, you cannot." This should not have come as any surprise since ATF had already answered this same question in 1999 and had given the same answer. So I am not sure how Gemtech is to blame for this since A) They did not make the ruling and B) They weren't even the first person to ask the question. All they did was ask what the law was.

As for Gemtech suing AAC, are you sure you aren't confusing SureFire, LLC v. Advanced Armament Corp., SACV 08-1405 DOC (C.D. Cal. 2008) with Gemtech?

Quote:
Originally Posted by Crosshair
"I have a source that tells me that their cans are made of plumbing parts." is libel, as you are asserting that your statement is factual and not just an opinion.
Strictly speaking, even if the story is false, the only thing being asserted is that the poster has a source. If he does have a source and if he reasonably believes that source to be true, then that isn't libel.

As far as AAC, I won't be doing any business with them. I've read the original controversy. Lots of small firearms companies seem to do just fine either posting their response in the forum or even not responding at all without involving lawyers. AAC sued in hopes of stopping that guy from speaking his mind. I don't have any interest in doing business with any company that is that quick on the draw.

I look forward to seeing the case though. I don't think that is going to turn out near as well for AAC as just leaving it alone would have.
Bartholomew Roberts is offline  
Old May 8, 2009, 10:53 AM   #18
PTK
Senior Member
 
Join Date: March 20, 2008
Posts: 442
I will say this - for the money, AAC products cannot be beat, and their customer service is top notch.


I just wouldn't be friends with Mr. Silvers, personally.
PTK is offline  
Old May 8, 2009, 05:16 PM   #19
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
So what about the Gemtech G5 video test? Seeing the actual construction of the G5 vs the claimed construction was certainly revealing. Fully welded core my foot. My TAC-16 is built better.

Then there was Surefire claiming that their cans could withstand 1,500 rounds fired full auto on an M4, stopping only long enough to change magazines. This is interesting since the military determined in testing that catastrophic failure on an M4 occurs at about 600 rounds of sustained FA fire.

Then Surefre sued AAC because AAC used a surefire can in an ad. Even though Surefire was not named in the ad. Though to be fair AAC shouldn't have used a dirty Surefire can for the comparison.

It's a tight market.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Old May 8, 2009, 06:56 PM   #20
Bartholomew Roberts
Senior Member
 
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 5,719
Quote:
So what about the Gemtech G5 video test?
What about it? What does that (or the other examples) have to do with whether or not I will deal with AAC or why AAC sued a guy on an Internet forum?
Bartholomew Roberts is offline  
Old May 8, 2009, 08:16 PM   #21
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
Quote:
What about it? What does that (or the other examples) have to do with whether or not I will deal with AAC or why AAC sued a guy on an Internet forum?
I was pointing out that AAC is hardly the only suppressor maker to engage in questionable behavior and make questionable claims. Gemtech's claim that the G5 "made for those that demand the apex of performance." despite having a design that incorporates roll pins for fastening major components together.

Surefire's claim that they fired 1500 rounds FA despite the fact that catastrophic failure occurs at around 600 rounds.

Quote:
Strictly speaking, even if the story is false, the only thing being asserted is that the poster has a source. If he does have a source and if he reasonably believes that source to be true, then that isn't libel.
OK you may be right there, I'm not an expert on the fine details of that. I'm just aware of the basics.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Old June 29, 2009, 07:21 AM   #22
SSG-Gibb
Member
 
Join Date: June 25, 2009
Location: The Free state (For now) of PA
Posts: 60
[QUOTE] I have very effectively loaded subsonic .308 using 150gr and 180gr cast bullets and fast burning pistol
powders such as red dot and bullseye. They are very accurate in the 50-70yd range (less than 1 inch). [QUOTE]




Although I do NOT as yet have any experience with suppressors, I have been trying to bone up on my reading so as to get the best can for my money in .45 acp, 223, and 308. I Love my 243 and wondered the same question. But from the reading I've been doing (and correct me if I'm wrong ) but doesn't the manufacturer tend to VOID the warranty if you use cast bullets? I HAVE been casting under the tutelage of my father "who has well over 40 years of experience on the subject" for better then 20 year and know that Using different types of lead such as Linotype and antimony make a bullet that CAN NOT be scratched with with out a pocket knife, and as such require no gas check for lighter loads even in rifles. But is it a safe practice to use even a well cast alloy bullet with a can?



P.s. I love the great wealth of knowledge here, thanks
SSG-Gibb is offline  
Old June 29, 2009, 08:37 AM   #23
freakshow10mm
Junior member
 
Join Date: January 23, 2008
Location: MI
Posts: 1,398
If you are using lead bullets I recommend a take apart suppressor for maintenance. I wouldn't shoot lead in a sealed can.
freakshow10mm is offline  
Old June 29, 2009, 10:07 AM   #24
Uncle Buck
Senior Member
 
Join Date: June 21, 2009
Location: West Central Missouri
Posts: 2,565
A few years ago I worked with the USDA on a managed deer hunt and they were using a .243 with a noise suppressor. The shot hand-loaded, fMJ rounds. It was a treat to watch some of these guys shoot. and you did not even have to wear ear plugs!
So, you could always try contacting the USDA about managed deer hunts and take it from there, getting the right guys on the phone and then asking them where their noise suppressors come from.
Uncle Buck is offline  
Old June 29, 2009, 09:33 PM   #25
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
Agreed, even hard cast lead bullets will leave some lube and lead inside the suppressor. With a take apart can this can be easily removed. With a sealed can it is recommended that you only use jacketed bullets.

Lead can be dissolved using a 50/50 vinegar hydrogen peroxide mixture in steel suppressors. Cans with aluminum components will be corroded by this mixture as well, so it is only for use in 100% steel cans.

A STRONG WORD OF WARNING. The byproduct of this reaction is Lead(II) acetate. In the concentrations you will get from cleaning a suppressor, it is very toxic and can be absorbed through the skin. You need to be very careful with its disposal.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13451 seconds with 7 queries