The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old April 24, 2009, 11:36 AM   #1
tpl77
Junior Member
 
Join Date: February 12, 2007
Posts: 7
remington model 10 pump- need spring

I'm looking for the spring that holds the release button (on the right side of the receiver). It's a leaf type spring, not a coil spring and it looks just like this bracket symbol ... {

Does anyone know where I might be able to find this part?

It's a 12 gauge circa 1912 incase that matters.

Thanks
tpl77 is offline  
Old April 24, 2009, 12:15 PM   #2
TxGun
Senior Member
 
Join Date: April 14, 2008
Location: Texas Hill Country ranch
Posts: 437
If you can figure out which spring it is, you might find it here under the 10 or 10A:

http://www.e-gunparts.com/model.asp?idDept=204

If not, a good gunsmith can probably make one.
TxGun is offline  
Old April 26, 2009, 06:06 AM   #3
tpl77
Junior Member
 
Join Date: February 12, 2007
Posts: 7
I bought the action bar lock button spring for the Numrich list, but it's the wrong spring. They sent a small coil spring. This spring looks very similiar to the bracket symbol {

I'm sure it's out there somewhere, I just need to bump into it.
tpl77 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05563 seconds with 7 queries