The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 28, 2013, 09:41 AM   #1
marbill
Junior Member
 
Join Date: March 13, 2010
Location: mid missouri
Posts: 11
mosin problem

Made a trip to lgs.owner has a super nice model 91 mosin sitting in a corner. He told me
It has a bulged chamber as the brass splits when fired. He would take $100. For it. Can anything be done to save it or is it a wall hanger. Thank you.
marbill is offline  
Old February 28, 2013, 10:01 AM   #2
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,371
It would need re-barreled. Problem is you can buy a 91/30 that works cheaper then you can re-barrel one.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old February 28, 2013, 10:03 AM   #3
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,505
Do not assume that it has a bulged chamber. Splitting brass can be caused by faults in the brass cases themselves. Have a gunsmith look at your gun/chamber.
__________________
Sometimes you get what you pay for, sometimes you only pay more for what you get.
Three shots are not a "group"...they are a "few".

If the Bible is the literal, infallible, unerring word of God...where are all those witches I am supposed to kill?
dahermit is offline  
Old February 28, 2013, 06:04 PM   #4
ToddG
Member
 
Join Date: June 29, 2012
Posts: 23
Agreed. Just because they split doesn't mean it's bulged. Search for other threads. I have one that does it all the time and posted some pics the first time it happened. Lots of "no biggie" responses with plenty of pics of cases much worse than mine. If the split is not too far down the case I wouldn't worry about it.
ToddG is offline  
Old March 1, 2013, 05:53 PM   #5
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,830
I found a minty M44 Mosin Nagant at BIG5 ~ 10 years ago for $55.

The bore looked unfired, but later I found out there was a big rust hole in the bottom of the chamber.

Borrowing a reamer and setting back the barrel a thread was as much trouble as putting a whole new barrel on the thing.



My extractor relief cut vs the Russian's cut during WWII.



The stuff written on the barrel got shorter.
__________________
The word 'forum" does not mean "not criticizing books."
"Ad hominem fallacy" is not the same as point by point criticism of books. If you bought the book, and believe it all, it may FEEL like an ad hominem attack, but you might strive to accept other points of view may exist.
Are we a nation of competing ideas, or a nation of forced conformity of thought?
Clark is online now  
Old March 2, 2013, 10:49 PM   #6
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,857
That's a ridiculous price....
AIM still sells them for $110- same as what this clown is asking for a wall hanger...
Currently out of stock, but they do get regular shipments. Sign up for email notification- and jump on it as soon as you get it because they don't last the day.

http://www.aimsurplus.com/product.as...+Nagant+Rifles
__________________
Custom Gunstocks for the Mosin-Nagant and Stock Duplication
www.biggorillagunworks.com
tobnpr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07065 seconds with 9 queries