The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 1, 2009, 02:46 PM   #1
coltfan
Junior Member
 
Join Date: September 24, 2006
Location: Indiana
Posts: 5
Kart EZ Fit Question

I have installed a Kart EZ Fit Barrell in my Colt series 70 45ACP. Everything seems to fit and lock up just as it should. However, it chokes on lead bullets that I have used for years in the stock Colt barrell. It looks as if the rifling edge ( leade ) from chamber mouth is closer than in the Colt barrell. I have to seat the same bullet much deeper or it runs into the rifling and the case head protrudes at least .025 past the hood. (230 gr lead RN, cases trimmed to .890). COAL needs to be about 1.213 to seat flush in the Kart. With the Colt barrell the same combo seats at 1.26. Does anyone have any insight to this? Normal, abnormal ?

Thanks.
coltfan is offline  
Old December 12, 2010, 05:48 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,406
Well, only a year and three quarters late noticing this, but in case anyone else has an issue with it:

The Kart chamber is tighter than your original and the throat is the GI hardball type. You can buy a .45 ACP throating reamer and move the throat forward and give it a more gradual taper as lead bullets often prefer.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05847 seconds with 7 queries