The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 27, 2009, 10:57 AM   #26
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,327
Most stocks are finished before the owner decides to do the bedding job. The bedding compound will not stick adequately to the finish, so you end up removing finish where the bedding will go and inletting grooves or channels into the wood to give the bedding a foothold.

You can bed a bare stock, obviously, and probably get better bonding and enjoy the advantage that no gun oil will have yet worked its way into the wood where you want the epoxy to go. However, once bedded, in order to finish the gun you will have to mask off all the bedding. The finish will prevent the gun from fitting back into good tight bedding, plus it won't be hard enough or stick well enough to the bedding compound for consistent or permanent results.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06191 seconds with 7 queries