The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old March 18, 2009, 08:44 PM   #1
gadgetguy1288
Member
 
Join Date: January 30, 2008
Location: Elizabeth City, NC
Posts: 89
I want to put a suppressor on my taurus 92

But i have a few questions,

1) where do i go about getting a threaded barrel for it?

2) what cans would you recommend for it? does anyone on here have a canned pt92?

3) does anyone make a 9mm flash suppressor that would be able to thread on to the barrel when im not using the can?


Any other info is always appreciated.

Randy
__________________
Randy

"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government, or in the case of a zombie outbreak."

Last edited by gadgetguy1288; March 18, 2009 at 11:25 PM.
gadgetguy1288 is offline  
Old March 19, 2009, 01:01 AM   #2
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
Most just get the short bit of the factory barrel that protrudes threaded 1/2X28. Threaded barrels would be available for purchase from barrel manuf.

The beretta/taurus is one of the pistols that can operate with a non boostered silencer, but it will also work with a booster, so buying a booster silencer will give you more options in mounting it onto other pistols.
David Hineline is offline  
Old March 23, 2009, 09:08 PM   #3
MGRacer
Senior Member
 
Join Date: April 13, 2005
Posts: 120
It is likely you will need higher sights: one option (I used them) is http://www.millettsights.com/controller.php

You can thread the stock barrel -- I did at first then went to a slightly longer barrel threaded from: http://www.jarvis-custom.com/

Picture:



I use either the updated SWR PC-K2 or an AAC Evolution 9 on the gun. It works with either booster or not.

Edit: You can bore a larger hole in the AR-15 (.223) flash suppressor since it has 1/2x28 threads .. just be careful you do not confuse a small hole one with your larger hole thread protector for the pistol.
__________________
Dave
Known as Racer on most other boards and as mgkac556 on AR15.com
MGRacer is offline  
Old April 10, 2009, 11:35 PM   #4
anthonydr2
Junior Member
 
Join Date: April 2, 2008
Posts: 6
Trident from SWR works well on Taurus 92 and 99. It is also full auto rated.
anthonydr2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06641 seconds with 7 queries