The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old March 12, 2009, 09:09 AM   #1
Gohawks7
Junior Member
 
Join Date: March 12, 2009
Posts: 3
Intratec Cat9

Hello, I am a newly registered member but have been reading the forum for a long time. I have just aquired a Intratec Cat9 basically for free when I bought a rifle. It did not have a manual with it. Can anyone help me find a website that I can get a manual or at least a parts breakdown for the gun! Any help would be appreciated!!
Gohawks7 is offline  
Old March 12, 2009, 12:49 PM   #2
Gohawks7
Junior Member
 
Join Date: March 12, 2009
Posts: 3
I have exhausted google looking. Can anyone at least tell me how to fully break down the gun. I have removed the slide and barrell assembly from the frame but I cant get the barrell out. Thanks!
Gohawks7 is offline  
Old March 12, 2009, 01:23 PM   #3
old_ironsights
Senior Member
 
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
Everything in the slide exits to the rear. Check the attachments, and if you still can't figure it out, contact me direct at old_ironsights@yahoo.com

I can always use one for parts, if you're of a mind to sell.
Attached Images
File Type: jpg photos 029.jpg (230.0 KB, 726 views)
File Type: jpg photos 023.jpg (201.1 KB, 620 views)
File Type: jpg photos 024.jpg (192.4 KB, 604 views)
__________________
The truth at its worst is superior
to lies at their best.
old_ironsights is offline  
Old March 12, 2009, 05:20 PM   #4
Gohawks7
Junior Member
 
Join Date: March 12, 2009
Posts: 3
Thanks Old Ironsights worked like a charm. I thought it would look worse in there but it wasn't too bad. Have you done anything to yours except for the sights. How did you do those? What kind of ammo are you feeding it? I thought it was interesting that it fit perfectly in my Fobus paddle for my Glock!
Gohawks7 is offline  
Old March 13, 2009, 08:21 AM   #5
old_ironsights
Senior Member
 
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
Those sights you see on the CAT-9 are factory sights. Intratec made a very few CAT-9's in 9mm and .380 with factory sights.

Square-nosed ammo doesn't feed reliably, but anything with a round nose will work very well.
Attached Images
File Type: jpg photos 002.jpg (234.8 KB, 410 views)
__________________
The truth at its worst is superior
to lies at their best.
old_ironsights is offline  
Old March 13, 2009, 11:44 AM   #6
OrangeJoe
Junior Member
 
Join Date: July 29, 2008
Posts: 5
Neither of you would happen to have a 9mm Glock that you could photo next to the Cat9? Would you?

That was one of my I WANT guns, but it soon went out of production. I have the closest thing (style-wise, of course) a Glock 26 .
OrangeJoe is offline  
Old March 13, 2009, 08:41 PM   #7
old_ironsights
Senior Member
 
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
Attachment is a comparison between one of my CAT-9's and my Glock 33...is that close enough?
Attached Images
File Type: jpg comparison.jpg (157.7 KB, 559 views)
__________________
The truth at its worst is superior
to lies at their best.
old_ironsights is offline  
Old April 5, 2009, 10:22 AM   #8
Dexter Marley
Junior Member
 
Join Date: April 5, 2009
Posts: 1
Cat ( Clip

Does anyone know where I could find a Cat9 clip. I've looked everywhere. Thanks!!
Dexter Marley is offline  
Old April 5, 2009, 10:46 AM   #9
old_ironsights
Senior Member
 
Join Date: November 17, 2004
Location: ~ OKLAHOMA CITY ~
Posts: 380
Gunbroker, Auctionarms and GunsAmerica. Past that you might check MEGA parts.

http://migagunparts.ecrater.com/
__________________
The truth at its worst is superior
to lies at their best.
old_ironsights is offline  
Old February 20, 2013, 05:11 PM   #10
jdwalk
Junior Member
 
Join Date: December 17, 2012
Posts: 1
I am looking for a video for the disassembly of the Intratec Mia Fl Cat 9 pistol.
jdwalk is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08781 seconds with 8 queries