The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old September 4, 2008, 10:01 AM   #1
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
Any Enfield shooters here?

Two 1942 Savage #4's.




....MJ....
MJ1 is offline  
Old September 4, 2008, 10:27 AM   #2
johnwilliamson062
Senior Member
 
Join Date: May 16, 2008
Posts: 6,846
nice rifles. Where did you get the cheek rests? You make those yourself?
__________________
$0 of an NRA membership goes to legislative action or court battles. Not a dime. Only money contributed to the NRA-ILA or NRA-PVF. You could just donate to the Second Amendment Foundation
First Shotgun Thread First Rifle Thread First Pistol Thread
johnwilliamson062 is offline  
Old September 4, 2008, 11:06 AM   #3
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
They came that way from 1942 on.

Any early rifles had the installed in the unit by the company level tech's.


Last edited by MJ1; September 5, 2008 at 09:58 PM.
MJ1 is offline  
Old September 5, 2008, 12:18 PM   #4
Croagh
Junior Member
 
Join Date: June 20, 2008
Posts: 8
Which ones mine!?
Croagh is offline  
Old September 5, 2008, 07:39 PM   #5
Tom2
Senior Member
 
Join Date: June 23, 2004
Location: Ohio
Posts: 5,647
I have a nice one with the light beech stock like the lower one. Not a sniper. It is setting in it's khaki transit bag right now just because ammo is not so plentiful anymore. Besides cruddy old mixed lot green surplus or commercial loads $$$. Maybe if I were in some part of the empire there would be better lots of ammo floating around.
__________________
Your gun is like your nose, it is just wrong for someone else to pick it for you!
Tom2 is offline  
Old September 5, 2008, 10:12 PM   #6
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
Funny rifle

People like them or they don't. With all the little things you have do adapt to with one make or another. I was caught or seduced by this silly rifle with a two part stock and rear lugs. I had to learn to hand load so I could shoot the thing. Thats a road you don't want to go down. First thing you know you will be buying Mosin Nagant's from N. Korea.


Look for help now. Don't let you self sink to buying French rifles.



Cheers
..MJ..
MJ1 is offline  
Old September 6, 2008, 10:45 PM   #7
Curtis(USAF)
Senior Member
 
Join Date: January 3, 2008
Posts: 241
I have a Lee Enfield No4MK1 that I picked up a little while back. Its a little worn, but I still love it.

[/IMG]
Curtis(USAF) is offline  
Old September 7, 2008, 02:00 AM   #8
ronl
Senior Member
 
Join Date: December 2, 2007
Posts: 797
Very nice rifles you have there. I have two Enfields a No4 and a no.1 mk 3*. I really like my mk3. It is a Lithgow rifle made in '42, issued in'43. It is in very good condition despite the small pieces of shrapnel embedded in the buttstock. I've pretty much given up firing mine since the surplus ammo dried up. I have a box of WW2 ammo but it's for display not for shooting.
ronl is offline  
Old September 7, 2008, 02:37 AM   #9
moose fat
Senior Member
 
Join Date: June 20, 2006
Location: Alaska, Yukon R. delta
Posts: 383
Ooh, nice snipers!

I had to learn to reload to shoot mine also. My first Enfield, sort of, is a Model of 1917. It took awhile to figure out what to shoot in it bullet wt. wise. Then I got an Ishapore 2a and got into relaoding so I could shoot it; I researched the .308 vs. 7.62NATO and decided relaoding would be the thing to do.

Then, since I have a C&R lisence, I started looking on the auction sites, just to see. I next bought a 1943 BSA Shirley No.4 MkI and then a 1943 BSA No.4 MkI Maltby w/a pristine two groove barrel. Then I found a Fazakerly No.4 MkII w/a UF55 prefix, then a Longbranch No.4 Mk1/3 that looks like it was FTR'ed in India, Ishy screw, all matching and new looking, nice bore. And then my last one a PF50 Fazakerly No.4 MkII. The seller said it had a pitted bore(sigh), but it looked new and all matching. When it came in the mail I cleaned it. The bore had some pits and not much rifling near the muzzle. I scrubbed out the bore, oiled it and set it aside. A few months later I cleaned the bore again and set it aside. The next time I looked down the bore most of the pits were gone and the rifling looked pretty good, lucked out.

I have only been shooting and working up loads for the UF55 Faz and PF50 Faz I've shot some surplus ammo through. I have yet to take a moose with one of my .303's but more sooner than later I will.

Some day I am thinking of putting on a no-gunsmith scope mount on the Maltby and getting a replacement "sniper stock" for it. The two groove barrels were supposed to be fairly accurate.

Last edited by moose fat; September 7, 2008 at 03:08 AM.
moose fat is offline  
Old September 7, 2008, 08:57 AM   #10
Tamara
Moderator Emeritus
 
Join Date: March 11, 2000
Location: Indianapolis, IN
Posts: 15,962
Enfields...

Sadly, I'm more an "owner" than a "shooter". I have a 1918-vintage BSA No.1Mk.III (not a III*, interestingly enough; as best I can gather, in the immediate postwar wind-down some rifles were actually made with the windage-adjustable rear, mag cut-off, and volley sights again,) and a very late production Fazakerly No.4Mk.II, one of the batch of "unissued" rifles that came into the country a few years back. I don't know it my Faz was actually "unissued", but it is definitely pristine.

Unfortunately, as a city-dweller, I get a lot more chance to shoot pistols than rifles, and I have yet to pull a trigger on either of these... well, I'm not sure I'd call Enfields "beauties", but you get the picture.
__________________
MOLON LABE!
2% Unobtainium, 98% Hypetanium.
The Arms Room: An Online Museum.
Tamara is offline  
Old September 7, 2008, 10:31 AM   #11
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
Enfields

I have one .308 now.


Building another (on the btm) soon and restoring a 1945 #4T (top pic.)



..Cheers..
....MJ....
MJ1 is offline  
Old September 8, 2008, 01:01 PM   #12
oldmaster111
Senior Member
 
Join Date: February 19, 2006
Location: Phoenix, Arizona
Posts: 199
I have a nice #1 Mk 111. pretty old gal. I added a cheek rest also.
oldmaster111 is offline  
Old September 8, 2008, 01:27 PM   #13
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,568
"...given up firing mine since the surplus ammo dried up..." The supplies of good milsurp .303 ball dried up long ago. Reloading fixes that.
Slug the bore(Lee-Enfield barrels can measure between .311" and .315" and still be considered ok. Over .315", the barrel is shot out) to find out what the actual diameter is, then use the closest diameter bullet. Most manufacturer's make .311" or .312" bullets. Steve at .303british.com is making .313" and .314" 200 grain jacketed bullets.
With any Lee-Enfield check the headspace.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old September 13, 2008, 08:32 AM   #14
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
Did a trade for this a few weeks back

Never tampered with 1942 MkI




I roll my own .303 and 7.62X54R.

Cheers
..MJ..
MJ1 is offline  
Old September 13, 2008, 11:01 PM   #15
Gewehr98
Senior Member
 
Join Date: June 30, 2000
Location: Token Creek, WI
Posts: 4,068
Shooters, indeed!

I won't own 'em if I cannot shoot 'em.

1944-dated BSA No5Mk1:



1941-dated Aussie Lithgow NoIMkIII*, with Weaver K4 for Mrs. G-98:



1917-dated Enfield Lock NoIMkIII*, my favorite of the batch:



And remember kids, neck-sizing dies are the Bee's Knees for reloading .303 British!
__________________
"Bother", said Pooh, as he chambered another round...

Neural Misfires
Gewehr98 is offline  
Old September 14, 2008, 10:59 AM   #16
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
Neck sizing +++++++++




...MJ...
MJ1 is offline  
Old September 30, 2008, 09:42 PM   #17
TEDDY
Junior member
 
Join Date: December 10, 2006
Location: MANNING SC
Posts: 837
adapters

I have a win cartridge adapter for 303.shoots 32acp.very neat I have them in 06/8 mm/303.also make my own reloads,Lee 312-160 TL 16 grs red dot.
TEDDY is offline  
Old September 30, 2008, 11:23 PM   #18
tokarev762
Member
 
Join Date: September 15, 2008
Location: Middle TN
Posts: 60
Gewehr98: That's a nice #5 you have there. I have one from Burma, dated Feb. of '44 from Frazackerly(sp?). The bore is shot out though. Bullets hit sideways at less than 15 yards. I'll either keep it as is or rebarrel it sometime. Maybe in a different caliber.

I like shooting my Ishey .308 with cast loads and want to start reloading for my #4,II* as it's such a shooter with new factory ammo. I picked up an Indian wire wrapped grenade rifle with the cup launcher & would like to make blank loads for it, but the bolt won't close on a round. Very nice rifle with a like new bore. I'll have to find some different bolt heads for it I guess.


I do have a 1945 Lithgow III*, but it's one of those Gibbs/Navy Arms 45/70 conversions.
tokarev762 is offline  
Old November 12, 2008, 06:16 PM   #19
GoCart
Member
 
Join Date: September 26, 2008
Posts: 47
No. 4 Mk1

I am waiting on my first enfield in the mail, should be here next week.

Pics on the way gentlemen.

This gun has been my dream gun for a long time and when I can afford/find a good one a No. 5 will be next!

Have a good one!

How did you do those sniper conversions on the first post?
__________________
Why I work: Work=$ and $ = Guns therefore work =
GoCart is offline  
Old November 12, 2008, 06:37 PM   #20
MJ1
Senior Member
 
Join Date: August 10, 2008
Posts: 327
I did not do them

Those are #4T rifles as issued.

..........................................................
MJ1 is offline  
Old November 15, 2008, 01:49 AM   #21
gandog56
Senior Member
 
Join Date: May 31, 2006
Location: Mobile, Alabama
Posts: 964
My 1943 ROF(F) No 4 MK 1:


And it doesn't shoot too bad, either.:
__________________
Some people think I'm paranoid because I have guns. If I have guns, what do I have to be paranoid about?
gandog56 is offline  
Old November 19, 2008, 12:33 PM   #22
kwells6
Senior Member
 
Join Date: October 24, 2008
Location: Central Arkansas
Posts: 437
I've carried a '27 No.1 Mk. III (no *) for the past 6 years in the deer woods. I recently found a set of match grade Hornady dies at a YARD SALE for $5... I reaload with Speer 150gr SP's that are .311". Extremely accurate in my rifle.
And down here in Arkansas, commercial .303 rounds are cheap ($15/box) where I shop.
kwells6 is offline  
Old November 19, 2008, 02:27 PM   #23
hanno
Senior Member
 
Join Date: February 23, 2008
Posts: 322
At one time I had nice collection of No4s including one from every maker. I gradually found myself shooting my Garands and 03s more, so sold off most of my LEs.

I'm down now to a never issued Faz No4 Mk2, a NZ marked LB (pristene - appears to have never been issued) and a Greek issued LB. The Greek issue LB is my shooter. I put a PH sight on it and it is a very accurate rifle.
hanno is offline  
Old November 19, 2008, 07:42 PM   #24
brewman
Member
 
Join Date: November 19, 2008
Location: South Australia
Posts: 42
Aussie SMLE shooter

G’day.

Here in Australia there are many Enfield’s still kicking round.

A lot of the early No1 MkIII have been sporterized and ruined in my humble opinion but there are still a lot around that retain the full wood and military markings.

I have an original 1943 Lithgow SMLE No1 MkIII* with all matching numbers, the barrel is a little pitted but it still shoots very well and the throat is not too eroded. Coupled with its 1907 bayonet it looks and feels great. The SMLE holds dear to many Australians as it was used by our troops in WW1 & WW2, personally for me my grandfather fought in Tobruk with a rifle identical to the one I now own and it is a humbling feeling to shoot a rifle like he would have used to fight with in war.

As some have mentioned in there posts it is very advisable to neck size the 303 case as many have done a lot of work and the throats are generally quite long, another thing to watch for with the No1’s is head space being excessive, the bolt head just screws out and there are many that have been made up of bits and pieces and had any old bolt head screwed on without headspace being checked. I have seen several friends rifles that stretch the cases excessively, this may be something you can get away with if your only using your brass once but if you reload they are bound to fail and have a head separation sooner or later.

I will try to post some pics of my SMLE in the near future.

Cheers from down under….
brewman is offline  
Old November 20, 2008, 09:39 AM   #25
alistaire
Senior Member
 
Join Date: May 22, 2008
Posts: 191
Wolf sells .303 in the "wolf Gold" line of brass cased ammo.
alistaire is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13897 seconds with 9 queries