The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 7, 2009, 02:49 AM   #1
458winshooter
Senior Member
 
Join Date: June 16, 2008
Location: Louisville,Tn
Posts: 405
To blue or not to blue that is the question

I have a German Luger that has been given the chrome treatment and I am wondering if it would do anything to raise the value of the gun by reblueing it?All numbers on the gun match but not the clip and the chrome finish is chipping off of the end of the barrel.So what do you think?Thanks Russ
458winshooter is offline  
Old February 7, 2009, 03:18 AM   #2
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 7,115
Russ
That is a call that only a qualified refinisher can make.
If the gun was polished and plated at a bumper chrome shop it probably would be too expensive to refinish it.
__________________
Bill DeShivs
www.billdeshivs.com
Bill DeShivs is offline  
Old February 7, 2009, 10:37 AM   #3
Al Thompson
Staff Alumnus
 
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,605
I think it's probably only worth it if it would sell the gun faster. I don't think you'll see something like if you spend 200 bucks to blue it, it will now be worth ~ 500 bucks, while if it was chromed it was worth ~ 300 bucks.

I think it would sell faster but once you ruin the original finish, it's a shooter, not a collector. Hopefully someone will chime in and let us know what a chrome Luger is worth...
__________________
http://www.scfirearms.org/
Al Thompson is offline  
Old February 7, 2009, 12:37 PM   #4
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,476
In general, refinishing a gun that has been refinished adds nothing to its value, and detracts nothing from its value. At this point it is a shooter, and even a restoration with rust bluing and nitre bluing of the appropriate parts will still be a restoration. But on the plus side, just about ANY Luger is going for absurd money these days.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 8, 2009, 12:58 AM   #5
458winshooter
Senior Member
 
Join Date: June 16, 2008
Location: Louisville,Tn
Posts: 405
Luger

Thanks for the replies I plan on keeping it but was just wondering if it would be worth the trouble.I bought it as a shooter and do enjoy it very much even if it looks alittle odd.
458winshooter is offline  
Old February 8, 2009, 02:07 AM   #6
Voyageur
Member
 
Join Date: October 28, 2008
Location: In the Shining Mountains
Posts: 72
I found a fella that did powder coating on firearms and they turned out pretty darn nice. Sandblasting was included in the fee and all I had to do was disassemble the firearm. Price depends on the intricacy of the job and what is being charged in your area.
Voyageur is offline  
Old February 10, 2009, 10:44 PM   #7
Inspector3711
Senior Member
 
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,546
Hmmm... Black nickel might look nice on a Luger... Then do the trigger and extractor in white nickel......
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times)
"That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell
Inspector3711 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05809 seconds with 7 queries