The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 3, 2009, 10:07 PM   #1
Nate2003
Member
 
Join Date: January 6, 2009
Location: Tennessee
Posts: 18
Mak90 pins removal

I have a MAK 90 and was going to try out a muzzle brake that is installed by removing the front sight pin. When it comes to removing pins are they all removing from the same side or does it just vary?
I know you should be knocking them from the side it's smaller on because common sense tells you can't do it the other way around. My gun though it's sorta hard to tell with some of these pins such as the one I need to get removing while the receiver ones are easy to see.

So mostly question is, are different pins installed from different sides or should they all pop out the same side.. if so anyone know what side I should be hitting this pin out on?

Thanks
Nate2003 is offline  
Old February 4, 2009, 12:24 PM   #2
Nate2003
Member
 
Join Date: January 6, 2009
Location: Tennessee
Posts: 18
anyone?
Nate2003 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06313 seconds with 7 queries