The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 30, 2009, 12:36 AM   #1
nfernaays
Junior Member
 
Join Date: January 25, 2009
Location: Western NY
Posts: 6
need a screw

looking for a firing pin screw for a stevens 107b single shot 12 gauge..willing to pay top dollar...please post info and fee
nfernaays is offline  
Old January 30, 2009, 12:45 AM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,427
Any gunsmith with a screw assortment can set you up. I believe it is a size 4 screw.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 30, 2009, 09:07 AM   #3
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,397
www.gunpartscorp.com
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old January 30, 2009, 11:35 AM   #4
rocket12
Senior Member
 
Join Date: November 20, 2005
Location: ohio
Posts: 117
rocket12 is offline  
Old January 30, 2009, 11:49 AM   #5
madmo44mag
Senior Member
 
Join Date: December 29, 2008
Location: Ft.Worth, Texas
Posts: 1,016
Man was that header ever misleading! ROFLMAO
madmo44mag is offline  
Old January 30, 2009, 04:52 PM   #6
sadsack
Senior Member
 
Join Date: February 4, 2006
Posts: 206
Mad: I saw the header and I knew right away he was a married man.
sadsack is offline  
Old January 30, 2009, 06:35 PM   #7
nfernaays
Junior Member
 
Join Date: January 25, 2009
Location: Western NY
Posts: 6
sorry if the header threw some of yah off...realized it after i posted....and i am married checked www.gunpartscorp.com is out of stock its a strange screw its not fully threaded prolly going to have to take an existing screw to the shop and grind part of one down.
nfernaays is offline  
Old January 30, 2009, 07:08 PM   #8
woad_yurt
Senior Member
 
Join Date: February 15, 2008
Posts: 1,206
Have you tried flowers or a bottle of wine? Maybe a scented candle?

A tip: It's always good to start the evening off by asking how her day went. Sometimes they just want to be heard.
__________________
A Makarov? Simple, easy and works perfectly every time. ¡Vale!

Last edited by woad_yurt; January 30, 2009 at 11:58 PM.
woad_yurt is offline  
Old January 30, 2009, 08:21 PM   #9
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,266
Well, it has to be really hard! I mean the screw of course, well, I mean...

Anyway, the THING acts as a firing pin retainer and can take a beating, so it should be fairly hard so it doesn't bend or you can't get it out. I do mean the firing pin screw, I really do.

Jim
__________________
Jim K
James K is online now  
Old January 31, 2009, 09:37 AM   #10
Alleykat
Junior member
 
Join Date: July 26, 2007
Posts: 3,668
To the OP: If you can find the screw, but are concerned about its hardness, just grind up one Cialis pill into a teaspoon of water and soak the screw in that solution. The screw will be hard for 36 hours, anytime you need it!
Alleykat is offline  
Old January 31, 2009, 09:41 AM   #11
SilentHitz
Senior Member
 
Join Date: February 28, 2008
Location: Ms.
Posts: 1,984
SilentHitz is offline  
Old January 31, 2009, 04:16 PM   #12
grymster2007
Senior Member
 
Join Date: May 22, 2007
Location: In the oak studded hills near Napa
Posts: 2,203
What's the thread pitch and size (diameter) of the screw? You can probably find one somewhere and if you have this info it will be easier.
__________________
grym
grymster2007 is offline  
Old February 8, 2009, 04:12 PM   #13
nfernaays
Junior Member
 
Join Date: January 25, 2009
Location: Western NY
Posts: 6
Finally got my screw

want to thank everyone for there help with my screw problem, firing pin screw i mean, actually found that a savage 25 firing pin screw works the same as the original, flowers helped too thanks everyone.
nfernaays is offline  
Old February 10, 2009, 10:42 PM   #14
Inspector3711
Senior Member
 
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,546
Quote:
its a strange screw
No... Nevermind....
__________________
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times)
"That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell
Inspector3711 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08667 seconds with 7 queries