|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 9, 2009, 02:51 AM | #1 |
Senior Member
Join Date: May 4, 2006
Posts: 105
|
Steyr Mannlicher model 1905 pistol
Can anyone point me where to get some sort of take down manual/parts list on Mannlicher 1905 pistol? Thanks!
|
January 9, 2009, 07:47 AM | #2 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Looked at Numrich?
http://e-gunparts.com
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
January 9, 2009, 01:19 PM | #3 |
Senior Member
Join Date: May 4, 2006
Posts: 105
|
Thanks. They don't have it, but that's one interesting place. I'll bookmark that for sure.
|
January 9, 2009, 06:00 PM | #4 |
Senior Member
Join Date: July 3, 2005
Location: Alabama
Posts: 925
|
Haven't found manual or diagram yet, but here's some history....
http://www.littlegun.be/arme%20autri...01905%20gb.htm TK |
January 10, 2009, 12:42 AM | #5 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
It is about as simple as a pistol can get.
Turn the pistol upside down and push down (toward the barrel) on the little tab in front of the trigger guard. Slide the part in front of the tab forward, sliding the bottom and both sides off to the front. With the thumb nail or a screwdriver, push back on the recoil spring guide and ease it up, letting the spring and spring guide come out to the front. Now pull the slide to the rear and lift it up and over the barrel. The entire works are now exposed and all the parts can be removed by hand. To remove the magazine spring and follower, use a screwdriver to push in on the catch in the hole at the bottom rear of the grip. The bottom of the grip will swing down and forward; the spring can be unhooked and the spring and follower removed. Jim |
July 14, 2009, 10:51 PM | #6 |
Junior Member
Join Date: January 4, 2007
Posts: 2
|
Steyr Mannlicher 1905 Pistol
Is there any place to get replacement parts? I need a Safety Lever. Maybe there is someone out there with a dimensioned drawing of this part and I can have one made. Any ideas?
|
Thread Tools | Search this Thread |
|
|