The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old January 7, 2009, 09:40 AM   #1
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
Romanian 8mm surplus, opening can safely?

heya all. I got some sweet Romanian 8mm surplus ammo from AIM surplus. it comes in a sealed "spam" can. see pics here:

http://www.aimsurplus.com/acatalog/c...auser_FMJ.html

anyone have any experience in opening these safely? you can see in the pictures there, even they farked up some of the boxes inside when they opened it. anyone have any better luck?

thanks in advance!!
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old January 7, 2009, 02:54 PM   #2
Homer2
Junior Member
 
Join Date: December 8, 2008
Posts: 11
I opened my first spam can with a hammer and chisel. Just do it gently. The metal is fairly soft and you can tap right through.
Homer2 is offline  
Old January 7, 2009, 02:57 PM   #3
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
hey, that's an excellent idea. thanks!! I will try that tonight after dinner and the kids' homework is done. did you keep your "SPAM" can? wish the lid just came off nice and easy, as it looks like the kind of thing that would be cool to keep around in tact.
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old January 7, 2009, 03:32 PM   #4
Homer2
Junior Member
 
Join Date: December 8, 2008
Posts: 11
Eventually I got one of the big green can openers that come with the crates. If you have a dremmel tool, you can use it to take sharp edges off the can and use it. I'm not that organized yet. I have two waiting to be used.

Here's a good thread on the issue from another place.

http://forums.gunboards.com/showthre...highlight=spam

Last edited by Homer2; January 7, 2009 at 03:37 PM. Reason: added a thought without another post
Homer2 is offline  
Old January 7, 2009, 03:49 PM   #5
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
yeah, I ordered the 2 cans later on, while I was still waiting for this one to be delievered. the 2-cans order is still in pending status, so, I had no idea how I should open these things!

your idea sounds fine. oh yeah, the crate looks re-useable as well. they both look very "historical" and collectible to me.
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old January 9, 2009, 03:53 PM   #6
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
just got my first delivery. used a chisel as suggested, and peeled back enough to get a small carton out. the ammo is in pristine condition. as a matter of fact, when the first chisel stroke broke through, there was that "sssssssssss" sound that comes from opening an airtight (or sealed, like a vacuum pack) container.

it smelled really cool; old, but clean. kind of machine-shop-ish. I am totally stoked. going to shoot some at the range tomorrow. if it's cool, which I have little doubt it will be, I am going to order as much as I can without the iwfe kicking me out of the house.
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old January 10, 2009, 01:57 PM   #7
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 35,892
I've done the same as Homr.

It takes awhile, and you need to be gentle.

If you get a wide cold chisel, you can lay the blade pretty perpendicular to the top of the can and drive it forward with a hammer. That makes it go faster.
Mike Irwin is offline  
Old January 10, 2009, 02:31 PM   #8
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
yeah, hear ya.

I just got back from the range, having shot 100+ rounds of the stuff. Sa-weeeet! nice an accurate, good power. Sooty as all get out though. but, as soon as I am done with this post, it's time to crack a beer and slather up that bore with some cleaning products.

I love this gun.
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old January 14, 2009, 03:37 PM   #9
FredT
Member
 
Join Date: November 16, 2008
Location: Cambridge, Ohio
Posts: 77
I was lucky enough to get a can opener with my first crate. Thanks for the heads up, I just ordered two more cases.
FredT is offline  
Old January 14, 2009, 03:52 PM   #10
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
well, they tell you straight up that when you get 2 cans (one case in the wooden crate) a can opener is provided. I found mine (I subsequently got a whole case on another order) attached to the "lid" of the wooden crate by a screw.

I thought the crate was cool, if a little cold-war era simplistic. I was definately psyched by the thought, as I opened it, that it had not been opened for 35 years!!! my case order (2 cans) was dated 1973, whereas my single-can order was 1975.

When I can afford it next month, I am ordering another crate. the air tight "sealed" aspect of the ammunition containers is very enticing to me, in a SHTF type situation. heck it's lasted 30+ years and still shoots great. So, I would anticipate being able to store it successfully for years to come.

Plus, it's a piece of history, like the gun I shoot the ammo with. and in a pinch, you can always intersperse the newer 8mm ammo (though expensive) from the likes of Remmington, Prvi Partizan, and S&B.

it's all good!!
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old February 25, 2009, 03:48 PM   #11
beeker77
Member
 
Join Date: July 9, 2006
Location: San Antonio
Posts: 86
Hello Spam Can Brothers

Wow, do we think alike, or what?!? I did the two cans in the wooden ammo case order-thing, too. Opened the first can immediately using the included can opener, and have been shooting it (good stuff!) ever since, but keeping the second can intact for any contingencies which might arise, as in SHTF.

...Together with my 8mm Hakim, that's a pretty nice combination: An accurate semi-auto, built like a tank, on Swedish machinery, along with hundreds and hundreds of rounds of hard-hitting ammo.
beeker77 is offline  
Old February 26, 2009, 08:27 AM   #12
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
agreed! (could you link to a pic of the Hakim, I would love to check it out). but yeah, I bought another Mauser (kind of a collector one, all matching serial numbers, etc.), so I'd shoot the same ammo, etc.

I have been looking at other weapons, but, it's all different ammo, and then it's all different cleaning suplies, etc...

same is good!!
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old February 26, 2009, 03:53 PM   #13
beeker77
Member
 
Join Date: July 9, 2006
Location: San Antonio
Posts: 86
Hakim Link?

You bet! Go here, and click on the gun: Egypt-Hakim
beeker77 is offline  
Old February 26, 2009, 07:18 PM   #14
Vergeltung
Senior Member
 
Join Date: November 12, 2008
Location: near NYC, USA
Posts: 292
thanks man! looks sweet!!
__________________
Tuitio Fidei et Obsequium Pauperum
Vergeltung is offline  
Old February 27, 2009, 08:03 AM   #15
DrLaw
Senior Member
 
Join Date: June 3, 2007
Location: Wild Western Illinois
Posts: 559
I just use...



a half stick of dynamite. Works great

Nah, I got one of those openers with a double order. Seems more trouble than it is worth at times. I never gave a thought to 'vacuum sealed for your freshness' before though.

The Doc is out now.
__________________
General McAuliffe said it best "Nuts."
DrLaw is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09172 seconds with 7 queries