The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old January 5, 2009, 07:18 PM   #1
jamcpherson
Junior Member
 
Join Date: January 5, 2009
Posts: 2
Timney Rifle Basix or Jard for Savage 110

I have an older 110 in 270win with a terrible trigger. I have heard mixed things about all these triggers. I also read somewhere that with the rifle basix trigger the gun would still fire in the safe position if more than 9lbs of pressure was applied.

i would be using the trigger for hunting so anywhere between 2.5-3.5lbs would be okay. looking for cleanest and safest option.

also read on here where some guy will retrofit old savages w/ accutrigger for $50 but i am not sure it would be as good as aftermarket.

any help would be appreciated.

thanks in advance

j
jamcpherson is offline  
Old January 5, 2009, 09:09 PM   #2
pbrktrt
Senior Member
 
Join Date: January 9, 2008
Posts: 313
i can only speak for the Timney. simple swap, three position safety, 2.5 lbs & i think it's perfect. mine is in a Vanguard though. i would think the Savage would be the same in quality.
pbrktrt is offline  
Old January 6, 2009, 04:37 AM   #3
the_right_reverend
Senior Member
 
Join Date: January 19, 2008
Location: Sneads Ferry, Nc
Posts: 232
I would do the timney the 2lbs sounds like a good deal for hunting

Myself I like the Match at about 7 ounce .... My new build will have a SSS Evolution @ 4 ounce or the Rifle Basix II @ 4 or 5 ounce
__________________
It does not take a majority to prevail, but rather an irate, tireless minority, keen on setting brushfires of freedom in the minds of men....
the_right_reverend is offline  
Old January 6, 2009, 09:20 AM   #4
skinewmexico
Senior Member
 
Join Date: November 10, 2007
Posts: 227
I've put Rifle Basix and Timney triggers in Savages, and have been very happy with both. Under 3 lb, nice clean break, big accuracy improvement. Never tried to put 9 lb on one with the safety on; in fact, I can't even think of a reason to try that. If you deliberately try to break a safety system on a rifle, you'll succeed a lot of the time.
skinewmexico is offline  
Old January 6, 2009, 02:53 PM   #5
jamcpherson
Junior Member
 
Join Date: January 5, 2009
Posts: 2
thanks for all the replies and advice.

i am leaning towards a timney or accutrigger retrofit. just not sold on which would be better.

also going to get a thumbhole stock to replace the stock junker.
jamcpherson is offline  
Old January 7, 2009, 01:32 PM   #6
ForneyRider
Senior Member
 
Join Date: December 4, 2007
Location: Forney, TX
Posts: 725
Don't Timney and Jard make parts for each other?
__________________
When all is said and done, there is a lot more said than done.
ForneyRider is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06044 seconds with 7 queries