The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old November 29, 2008, 03:57 PM   #1
ryrack
Junior Member
 
Join Date: October 29, 2008
Posts: 7
muzzle crown or no crown??

Does anyone know specifically what a muzzle crown adds to performance?? Ive heard everything from it "acts like a muzzle break" to "it keeps dirt out of the bore rifling".
ryrack is offline  
Old November 29, 2008, 04:01 PM   #2
Creature
Junior member
 
Join Date: April 8, 2007
Location: Virginia
Posts: 3,769
Crowning a rifle barrel, in simplest terms, is shaping the muzzle so the rifling's edge is protected from impact. Most factory barrels have
a round, convex-shaped crown from bore's edge to the barrel's outside diameter. That's easy to make and finish, plus looking rather pleasing.

The accuracy part of the crown means the land and groove part of the barrel must let the bullet's base exit evenly all the way around. When this happens, gas escapes uniformly and evenly around the bullet's base. If gas escapes unevenly (poor crown, even unsquare bullet bases), the point of greatest gas release will push the bullet in the opposite direction and tilt it. Tilted bullets leaving the barrel just don't shoot straight; how far they move sideways depends on their velocity, spin rate, and degree of tilt (or yaw, as it's sometimes called).


This photo illustrates a crisp and evenly cut crown. You can see the traces of powder residue as it escaped evenly from around the base of the bullet as it exited.

Last edited by Creature; November 29, 2008 at 04:10 PM.
Creature is offline  
Old November 29, 2008, 04:43 PM   #3
Kortik
Member
 
Join Date: October 31, 2007
Posts: 22
Mr. Creature gave an excellent summary. I would just add
one word "distance" to his sentence:

"how far they move sideways depends on their velocity, spin rate, and degree of tilt and DISTANCE."
Kortik is offline  
Old November 29, 2008, 06:58 PM   #4
ryrack
Junior Member
 
Join Date: October 29, 2008
Posts: 7
crown

so, a competition crown is just an insurance to make sure the bore is even, correct??

Last edited by ryrack; November 29, 2008 at 07:04 PM.
ryrack is offline  
Old November 29, 2008, 07:35 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,124
I am no expert, but IMHO the supposed advantages of the various types of crowns are pretty much hype. As Creature says, the absolute evenness of the bullet exit is the key, no matter what is outside that point.

Jim
__________________
Jim K
James K is offline  
Old November 29, 2008, 11:47 PM   #6
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,817
The actual crown is the slight bevel right where the rifling ends.
The purpose is to insure there are no burrs or other imperfections left by the machining process.

The end of the muzzle, often called the crown, may or may not have a real effect on accuracy.
Remington believes their spherical muzzles enhance accuracy.
Older types of muzzles are mostly to protect the rifling by recessing it in one way or another.
Dfariswheel is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07307 seconds with 9 queries