The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old November 17, 2008, 10:36 PM   #1
300magman
Senior Member
 
Join Date: September 12, 2008
Posts: 714
Trouble with a semi-rare old .22 Help please

Does anyone know how to disassemble the bolt on a Winchester Western (Canada) Cooey Model 600 .22 bolt action repeater. This gun is somewhere near 50 years old I think...but I have no way to verify.
It came with a somewhat elaborate engraving of a rabbit on the stock and has a barrel around 24" long if memory serves.

The firing pin is worn from use (presumably) and it no longer makes enough contact with the rim of the shell to ensure reliable operation...perhaps 1 fire out of 3 or 4 strikes. Can it be moved forward if it is worn (I'm going to try a cleaning first if I can disassemble the bolt itself)
300magman is offline  
Old November 26, 2008, 02:17 PM   #2
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
First, verify that the rifle is unloaded by checking the chamber & breech.

Next remove the barrel/action from the stock by unscrewing the slotted screw on the bottom of the stock.

On the bottom of the action there is a threaded rod with a nut on it. Using the proper size wrench loosen this nut and unscrew the threaded rod until the tube magazine drops down enough to disengage from the bottom of the rifles bolt. pull the bolt to the rear (it will go back further than normal at this point) and then pull the trigger and keep it to the rear while withdrawing the bolt from the rifle.

I would flush out the firing pin channel with a good cleaner amd air pressure.

Reassembly is the reverse of the above, taking care not to screw the threaded rod in too far or it will keep the tube magazine from moving back and forth as it should.
PetahW is offline  
Old November 26, 2008, 06:36 PM   #3
adamhome
Junior Member
 
Join Date: November 26, 2008
Posts: 3
cooey mod 600 rep .22

pm an e-mail 'n I'll attach a manual 1.1 MB files to much for the forum attachment of about 400
acha: no s/n made before 1961
adam
adamhome is offline  
Old November 9, 2011, 08:48 AM   #4
novascotia
Junior Member
 
Join Date: November 9, 2011
Posts: 2
Cooey 600 user manual

Is it possible to have a Cooey 600 user manual sent to me as well, if I provide my email address?
novascotia is offline  
Old November 10, 2011, 09:47 PM   #5
300magman
Senior Member
 
Join Date: September 12, 2008
Posts: 714
What exactly is it that you are trying to do with the rifle? Other than actually disassembling the bolt itself the rest is fairly straight forward, I might be able to help you out if the directions in this thread still leave you wanting.
300magman is offline  
Old January 15, 2012, 11:18 AM   #6
cal_h
Junior Member
 
Join Date: January 14, 2012
Posts: 2
looking for info on how to disassemble the bolt on a win-cooey 600

the problem is as above ... one shot fires and several light strikes....... no fire

upon close inspection, the striker part of the bolt has a worn guide pin or dowel
this is allowing the striker part of the bolt out of alignment with the v notch between the two pieces of the bolt ...... my opinion is the striker is hitting and rotating into place with most of the energy gone, this is causing the light strikes and misfires ...... and the occasional good fire

now: how to disassemble the bolt and remove that pin (dowel) for replacement

thanks
cal
cal_h is offline  
Old January 20, 2012, 11:36 PM   #7
Mr_Raw
Member
 
Join Date: January 20, 2012
Posts: 51
Can you post some pic's of the bolt so we can better understand its construction.
Mr_Raw is offline  
Old January 21, 2012, 03:48 AM   #8
loof
Junior Member
 
Join Date: January 21, 2012
Posts: 1
Model 600 trigger guard

Hi all, I have an old Cooey model 600 that needs a trigger guard can someone advise where I would be able to purchase one (online)
I am in Australia and can't find anyone who can supply. thanks
loof is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07980 seconds with 7 queries